centosyumphp53

① centos6.5怎麼安裝php5.5

1.******已安裝Nginx******
ps -aux | grep nginx
netstat -anptu | grep 80

2.清除系統中php痕跡：
yum remove php
rm -rvf /etc/php
rm -rvf /etc/php.ini
rm -f /usr/bin/php

3.安裝php所需軟體包：
tar zxvf autoconf-2.68.tar.gz -C /usr/src
cd /usr/src/autoconf-2.68/
./configure && make && make install
tar zxvf libiconv-1.14.tar.gz -C /usr/src
cd /usr/src/libiconv-1.14/
./configure && make && make install
tar zxvf libmcrypt-2.5.8.tar.gz -C /usr/src
cd /usr/src/libmcrypt-2.5.8/
./configure && make && make install
ldconfig
cd libltdl/
./configure --enable-ltdl-install
make && make install
export LD_LIBRARY_PATH=/usr/local/lib:$LD_LIBRARY_PATH
tar zxvf mhash-0.9.9.9.tar.gz -C /usr/src
cd /usr/src/mhash-0.9.9.9/
./configure && make && make install
tar zxvf mcrypt-2.6.8.tar.gz -C /usr/src
cd /usr/src/mcrypt-2.6.8/
./configure && make && make install

4.載入php動態模塊：
ln -s /usr/local/lib/libmcrypt.la /usr/lib64/libmcrypt.la
ln -s /usr/local/lib/libmcrypt.so /usr/lib64/libmcrypt.so
ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib64/libmcrypt.so.4
ln -s /usr/local/lib/libmcrypt.so.4.4.8
/usr/lib64/libmcrypt.so.4.4.8
ln -s /usr/local/lib/libmhash.a /usr/lib64/libmhash.a
ln -s /usr/local/lib/libmhash.la /usr/lib64/libmhash.la
ln -s /usr/local/lib/libmhash.so /usr/lib64/libmhash.so
ln -s /usr/local/lib/libmhash.so.2 /usr/lib64/libmhash.so.2
ln -s /usr/local/lib/libmhash.so.2.0.1
/usr/lib64/libmhash.so.2.0.1
cp -R /usr/lib64/libpng.* /usr/lib/
cp -R /usr/lib64/libjpeg.* /usr/lib/
echo "/lib" >> /etc/ld.so.conf
echo "/usr/lib" >> /etc/ld.so.conf
echo "/usr/lib64" >> /etc/ld.so.conf
echo "/usr/local/lib" >> /etc/ld.so.conf
echo "* soft nproc 65535" >> /etc/security/limits.conf
echo "* hard nproc 65535" >> /etc/security/limits.conf
echo "* soft nofile 65535" >> /etc/security/limits.conf
echo "* hard nofile 65535" >> /etc/security/limits.conf
echo "fs.file-max=65535" >> /etc/sysctl.conf

ldconfig

5.解壓、配置、編譯、安裝php：
tar zxvf php-5.5.25.tar.gz -C /usr/src
cd /usr/src/php-5.5.25/
./configure --prefix=/usr/local/php \
--with-config-file-path=/usr/local/php/etc \
--enable-fpm \
--with-fpm-user=www \
--with-fpm-group=www \
--with-mysql=mysqlnd \
--with-mysqli=mysqlnd \
--with-pdo-mysql=mysqlnd \
--with-iconv-dir \
--with-freetype-dir \
--with-jpeg-dir \
--with-png-dir \
--with-zlib \
--with-libxml-dir=/usr \
--enable-xml \
--enable-opcache \
--disable-rpath \
--enable-bcmath \
--enable-shmop \
--enable-sysvsem \
--enable-inline-optimization \
--with-curl \
--enable-mbregex \
--enable-mbstring \
--with-mcrypt \
--enable-ftp \
--with-gd \
--enable-gd-native-ttf \
--with-openssl \
--with-mhash \
--enable-pcntl \
--enable-sockets \
--with-xmlrpc \
--enable-zip \
--enable-soap \
--without-pear \
--with-gettext \
--disable-fileinfo
make ZEND_EXTRA_LIBS='-liconv'
make install

6.鏈接php可執行文件：
ln -s /usr/local/php/bin/php /usr/bin/php
ln -s /usr/local/php/bin/phpize /usr/bin/phpize
ln -s /usr/local/php/sbin/php-fpm /usr/bin/php-fpm

7.編輯php.ini配置文件：
cp /usr/src/php-5.5.25/php.ini-proction
/usr/local/php/etc/php.ini
ln -s /usr/local/php/etc/php.ini /etc/php.ini
vim /etc/php.ini
[PHP]
engine = On
zend.ze1_compatibility_mode = Off
short_open_tag = On
asp_tags = Off
precision
= 12
y2k_compliance = On
output_buffering = On
zlib.output_compression = Off
implicit_flush = Off
unserialize_callback_func=
serialize_precision = 100
safe_mode = Off
safe_mode_gid = Off
safe_mode_include_dir =
safe_mode_exec_dir =
safe_mode_allowed_env_vars = PHP_
safe_mode_protected_env_vars = LD_LIBRARY_PATH
disable_functions =
passthru,exec,system,chroot,scandir,chgrp,chown,shell_exec,proc_open,proc_get_status,ini_alter,ini_restore,dl,openlog,syslog,readlink,symlink,popepassthru,stream_socket_server,fsocket
disable_classes =
expose_php = On
error_reporting = E_ALL & ~E_NOTICE
display_errors = On
display_startup_errors = Off
log_errors = Off
log_errors_max_len = 1024
ignore_repeated_errors = Off
ignore_repeated_source = Off
report_memleaks = On
track_errors = Off
variables_order = "EGPCS"
register_globals = Off
register_long_arrays = Off
register_argc_argv = On
auto_globals_jit = On
post_max_size = 50M
magic_quotes_gpc = Off
magic_quotes_runtime = Off
magic_quotes_sybase = Off
auto_prepend_file =
auto_append_file =
default_mimetype = "text/html"
doc_root =
user_dir =
extension_dir =
"/usr/local/php/lib/php/extensions/no-debug-non-zts-20121212/"
enable_dl = On
cgi.fix_pathinfo=0
file_uploads = On
upload_max_filesize = 50M
max_file_uploads = 20
allow_url_fopen = On
allow_url_include = Off
default_socket_timeout = 60
[Date]
date.timezone = PRC
[filter]
[iconv]
[sqlite]
[Pcre]
[Syslog]
define_syslog_variables = Off
[mail function]
SMTP = localhost
smtp_port = 25
[SQL]
sql.safe_mode = Off
[ODBC]
odbc.allow_persistent = On
odbc.check_persistent = On
odbc.max_persistent = -1
odbc.max_links = -1
odbc.defaultlrl = 4096
odbc.defaultbinmode = 1
[MySQL]
mysql.allow_persistent = On
mysql.max_persistent = -1
mysql.max_links = -1
mysql.default_port =
mysql.default_socket =
mysql.default_host =
mysql.default_user =
mysql.default_password =
mysql.connect_timeout = 60
mysql.trace_mode = Off
[MySQLi]
mysqli.max_links = -1
mysqli.default_port = 3306
mysqli.default_socket =
mysqli.default_host =
mysqli.default_user =
mysqli.default_pw =
mysqli.reconnect = Off
[mSQL]
msql.allow_persistent = On
msql.max_persistent = -1
msql.max_links = -1
[OCI8]
[PostgresSQL]
pgsql.allow_persistent = On
pgsql.auto_reset_persistent = Off
pgsql.max_persistent = -1
pgsql.max_links = -1
pgsql.ignore_notice = 0
pgsql.log_notice = 0
[Sybase]
sybase.allow_persistent = On
sybase.max_persistent = -1
sybase.max_links = -1
sybase.min_error_severity = 10
sybase.min_message_severity = 10
sybase.compatability_mode = Off
[Sybase-CT]
sybct.allow_persistent = On
sybct.max_persistent = -1
sybct.max_links = -1
sybct.min_server_severity = 10
sybct.min_client_severity = 10
[bcmath]
bcmath.scale = 0
[browscap]
[Informix]
ifx.default_host =
ifx.default_user =
ifx.default_password =
ifx.allow_persistent = On
ifx.max_persistent = -1
ifx.max_links = -1
ifx.textasvarchar = 0
ifx.byteasvarchar = 0
ifx.charasvarchar = 0
ifx.blobinfile = 0
ifx.nullformat = 0
[Session]
session.save_handler = files
session.use_cookies = 1
session.name = PHPSESSID
session.auto_start = 0
session.cookie_lifetime = 0
session.cookie_path = /
session.cookie_domain =
session.cookie_httponly =
session.serialize_handler = php
session.gc_probability = 1
session.gc_divisor
= 100
session.gc_maxlifetime = 1440
session.bug_compat_42 = 1
session.bug_compat_warn = 1
session.referer_check =
session.entropy_length = 0
session.entropy_file =
session.cache_limiter = nocache
session.cache_expire = 180
session.use_trans_sid = 0
session.hash_function = 0
session.hash_bits_per_character = 4
url_rewriter.tags =
"a=href,area=href,frame=src,input=src,form=,fieldset="
[MSSQL]
mssql.allow_persistent = On
mssql.max_persistent = -1
mssql.max_links = -1
mssql.min_error_severity = 10
mssql.min_message_severity = 10
mssql.compatability_mode = Off
mssql.secure_connection = Off
[Assertion]
[COM]
[mbstring]
[FrontBase]
[gd]
[exif]
[Tidy]
tidy.clean_output = Off
[soap]
soap.wsdl_cache_enabled=1
soap.wsdl_cache_dir="/tmp"
soap.wsdl_cache_ttl=86400
[Zend Optimizer]
zend_extension =
/usr/local/php/lib/php/extensions/no-debug-non-zts-20121212/opcache.so
zend_loader.enable = 1
zend_loader.disable_licensing = 0
zend_loader.obfuscation_level_support = 3

8.編輯php-fpm.conf配置文件：
cp /usr/local/php/etc/php-fpm.conf.default
/usr/local/php/etc/php-fpm.conf
vim /usr/local/php/etc/php-fpm.conf
[global]
pid = /home/php/pid/php-fpm.pid
error_log = /home/php/log/php-fpm_error.log
log_level = notice
[www]
listen = 127.0.0.1:9000
listen.backlog = -1
listen.allowed_clients = 127.0.0.1
listen.owner = www
listen.group = www
listen.mode = 0666
user = www
group = www
pm = dynamic
pm.max_children = 10
pm.start_servers = 2
pm.min_spare_servers = 1
pm.max_spare_servers = 6
request_terminate_timeout = 100
request_slowlog_timeout = 0
slowlog = /home/php/log/slow.log

9.編寫php-fpm啟動腳本
vim /etc/init.d/php-fpm
#!/bin/sh
# chkconfig:
2345 90
10
#
Description:
Start and
Stop php-fpm
# Provides:

php-fpm
#
Default-Start:
2 3 4 5
#
Default-Stop:
0 1 6
prefix=/usr/local/php
exec_prefix=${prefix}
php_fpm_BIN=${prefix}/sbin/php-fpm
php_fpm_CONF=${prefix}/etc/php-fpm.conf
php_fpm_PID=/home/php/pid/php-fpm.pid
php_opts="--fpm-config $php_fpm_CONF --pid $php_fpm_PID"
wait_for_pid () {
try=0
while test $try -lt 35 ; do
case "$1" in
'created')
if [ -f "$2" ] ; then
try=''
break
fi
;;
'removed')
if [ ! -f "$2" ] ; then
try=''
break
fi
;;
esac
echo -n .
try=`expr $try + 1`
sleep 1
done
}
case "$1" in
start)
echo -n "Starting php-fpm..."
$php_fpm_BIN --daemonize $php_opts
if [ "$?" != 0 ] ; then
echo " failed"
exit 1
fi
wait_for_pid created $php_fpm_PID
if [ -n "$try" ] ; then
echo " failed"
exit 1
else
echo " done"
fi
;;
stop)
echo -n "Stoping php-fpm..."
if [ ! -r $php_fpm_PID ] ; then
echo "warning, no pid file found - php-fpm is not running ?"
exit 1
fi
kill -QUIT `cat $php_fpm_PID`
wait_for_pid removed $php_fpm_PID
if [ -n "$try" ] ; then
echo " failed. Use force-quit"
exit 1
else
echo " done"
fi
;;
force-quit)
echo -n "Terminating php-fpm "
if [ ! -r $php_fpm_PID ] ; then
echo "warning, no pid file found - php-fpm is not running ?"
exit 1
fi
kill -TERM `cat $php_fpm_PID`
wait_for_pid removed $php_fpm_PID
if [ -n "$try" ] ; then
echo " failed"
exit 1
else
echo " done"
fi
;;
restart)
$0 stop
$0 start
;;
reload)
echo -n "Reload service php-fpm "
if [ ! -r $php_fpm_PID ] ; then
echo "warning, no pid file found - php-fpm is not running ?"
exit 1
fi
kill -USR2 `cat $php_fpm_PID`
echo " done"
;;
*)
echo "Usage: $0 {start|stop|force-quit|restart|reload}"
exit 1
;;
esac

10.創建目錄並修改許可權，重啟nginx服務：
mkdir -p /home/php/log
mkdir -p /home/php/pid
chown -R www:www /home/php/log
chown -R www:www /home/php/pid
service nginx restart

11.添加php-fpm系統服務：
chmod +x /etc/init.d/php-fpm
chkconfig --add php-fpm
chkconfig --level 2345 php-fpm on
chkconfig --list | grep php-fpm

12.啟動php-fpm服務：
service php-fpm start
ps -aux | grep php-fpm
netstat -anptu | grep 9000

13.配置php測試頁：
vim /home/www/html/phpinfo.php

② 如何在CentOS 6上通過YUM安裝Nginx和PHP

在CentOS 6上通過YUM安裝Nginx和PHP-FPM：
第一步，在/etc/yum.repos.d/目錄下創建一個源配置文件nginx.repo：
cd /etc/yum.repos.d/
vim nginx.repo

填寫如下內容：
[nginx]
name=nginx repo
baseurl=nginx.org/packages/centos/$releasever/$basearch/
gpgcheck=0
enabled=1
保存，則會產生一個/etc/yum.repos.d/nginx.repo文件。

下面直接執行如下指令即可自動安裝好Nginx：
yum install nginx -y
安裝完成，下面直接就可以啟動Nginx了：
/etc/init.d/nginx start
現在Nginx已經啟動了，直接訪問伺服器就能看到Nginx歡迎頁面了的。

③ centos 下如何通過yum安裝最新的php

remi源，這里的php版本較新，5.4，5.5，5.6都有，還有配套的各種擴展
rpms.famillecollet.com


Centos 6.默認下沒有安裝php組件，因此我們需要輸入命令：yum -y install php 回車如下圖。
不用管，程序會自動完成安裝及配置。

Zend組件，Centos 6.3 裡面是沒有的，需要手動下載，及安裝教程請點擊下面鏈接：

到此前期的准備工作已完成，下面就要對Apache進行配置
輸入命令 pd/conf/httpd.conf //打開Apache配置文件，
找到ServerTokens OS將「OS」改為「Prod 「 。//顯示伺服器運行錯誤信息。與下圖一樣，那麼Apache你就配置成功了，如果不一樣請仔細對比上面的教程是不是那個步驟少了#及字母拼寫錯了。
到此php運行環境便配置成功啦。

④ 阿里雲上的centos 7.2怎麼yum安裝php 5.6

因之前通過網易的 centos 鏡像，將阿里雲的 centos 升級到最新版了，乘自己的項目尚未開始正式開發，遂將所有的相應環境都升級到最高。
查看 centos 版本：
[root@iZ23d ~]# cat /etc/centos-release
CentOS linux release 7.2.1511 (Core)
1、刪除之前的 php 版本：
[root@iZ23d ~]# yum remove php* php-common
Loaded plugins: langpacks
Repository base is listed more than once in the configuration
Repository updates is listed more than once in the configuration
Repository extras is listed more than once in the configuration
Repository centosplus is listed more than once in the configuration
No Match for argument: php-5.4.16
No Match for argument: php-5.4.16.tar.gz
No Match for argument: php-7.0.1RC1
No Match for argument: php-7.0.1RC1.tar.gz
No Match for argument: phpMyAdmin-4.4.0.tar.gz
No Match for argument: php-common
No Packages marked for removal
2、rpm 安裝 Php7 相應的 yum源：
[root@iZ23d ~]# rpm -Uvh https://mirror.webtatic.com/yum/el7/webtatic-release.rpm
Retrieving https://mirror.webtatic.com/yum/el7/webtatic-release.rpm
warning: /var/tmp/rpm-tmp.LhJKKR: Header V4 RSA/SHA1 Signature, key ID 62e74ca5: NOKEY
Preparing... ################################# [100%]
package webtatic-release-7-3.noarch is already installed
3、 直接yum安裝php7：
[root@iZ23d ~]# yum install php70w
Loaded plugins: langpacks
Repository base is listed more than once in the configuration
Repository updates is listed more than once in the configuration
Repository extras is listed more than once in the configuration
Repository centosplus is listed more than once in the configuration
Resolving Dependencies
--> Running transaction check
。。。 【省略】
Warning: RPMDB altered outside of yum.
Installing : php70w-common-7.0.0-1.w7.x86_64 1/3
Installing : php70w-cli-7.0.0-1.w7.x86_64 2/3
Installing : php70w-7.0.0-1.w7.x86_64 3/3
Verifying : php70w-7.0.0-1.w7.x86_64 1/3
Verifying : php70w-common-7.0.0-1.w7.x86_64 2/3
Verifying : php70w-cli-7.0.0-1.w7.x86_64 3/3
Installed:
php70w.x86_64 0:7.0.0-1.w7
Dependency Installed:
php70w-cli.x86_64 0:7.0.0-1.w7 php70w-common.x86_64 0:7.0.0-1.w7
Complete!
4、檢查 php 版本：
[root@iZ23d ~]# php -v
PHP 7.0.0 (cli) (built: Dec 2 2015 20:42:32) ( NTS )
Copyright (c) 1997-2015 The PHP Group
Zend Engine v3.0.0, Copyright (c) 1998-2015 Zend Technologies
[root@iZ23d2e6hoqZ ~]#
以上顯示安裝成功！
5、重啟 Apache，查看 phpinfo :
[root@iZ23d ~]# systemctl restart httpd.service
檢查phpinfo:
PHP Version 7.0.0
SystemLinux iZ23d 3.10.0-229.11.1.el7.x86_64 #1 SMP Thu Aug 6 01:06:18 UTC 2015 x86_64
Build DateDec 2 2015 20:43:38
Server APIApache 2.0 Handler
Virtual Directory Supportdisabled
Configuration File (php.ini) Path/etc
Loaded Configuration File/etc/php.ini
Scan this dir for additional .ini files/etc/php.d
Additional .ini files parsed/etc/php.d/bz2.ini, /etc/php.d/calendar.ini, /etc/php.d/ctype.ini, /etc/php.d/curl.ini, /etc/php.d/exif.ini, /etc/php.d/fileinfo.ini, /etc/php.d/ftp.ini, /etc/php.d/gettext.ini, /etc/php.d/gmp.ini, /etc/php.d/iconv.ini, /etc/php.d/json.ini, /etc/php.d/phar.ini, /etc/php.d/shmop.ini, /etc/php.d/simplexml.ini, /etc/php.d/sockets.ini, /etc/php.d/tokenizer.ini, /etc/php.d/xml.ini, /etc/php.d/zip.ini
PHP API20151012
PHP Extension20151012
Zend Extension320151012
Zend Extension BuildAPI320151012,NTS
PHP Extension BuildAPI20151012,NTS
Debug Buildno
Thread Safetydisabled
Zend Signal Handlingdisabled
Zend Memory Managerenabled
Zend Multibyte Supportdisabled
IPv6 Supportenabled
DTrace Supportenabled
Registered PHP Streamshttps, ftps, compress.zlib, php, file, glob, data, http, ftp, compress.bzip2, phar, zip
Registered Stream Socket Transportstcp, udp, unix, udg, ssl, sslv3, sslv2, tls, tlsv1.0, tlsv1.1, tlsv1.2
Registered Stream Filterszlib.*, string.rot13, string.toupper, string.tolower, string.strip_tags, convert.*, consumed, dechunk, bzip2.*, convert.iconv.*
This program makes use of the Zend Scripting Language Engine:
Zend Engine v3.0.0, Copyright (c) 1998-2015 Zend Technologies
Configuration
apache2handler
Apache VersionApache/2.4.6 (CentOS)
Apache API Version20120211
Server [email protected]
Hostname:Portxxxx.xxxxx.xxx:0
User/Groupapache(48)/48
Max RequestsPer Child: 0 - Keep Alive: on - Max Per Connection: 100
TimeoutsConnection: 60 - Keep-Alive: 15
Virtual ServerYes
Server Root/etc/httpd
Loaded Molescore mod_so http_core mod_access_compat mod_actions mod_alias mod_allowmethods mod_auth_basic mod_auth_digest mod_authn_anon mod_authn_core mod_authn_dbd mod_authn_dbm mod_authn_file mod_authn_socache mod_authz_core mod_authz_dbd mod_authz_dbm mod_authz_groupfile mod_authz_host mod_authz_owner mod_authz_user mod_autoindex mod_cache mod_cache_disk mod_data mod_dbd mod_deflate mod_dir mod_mpio mod_echo mod_env mod_expires mod_ext_filter mod_filter mod_headers mod_include mod_info mod_log_config mod_logio mod_mime_magic mod_mime mod_negotiation mod_remoteip mod_reqtimeout mod_rewrite mod_setenvif mod_slotmem_plain mod_slotmem_shm mod_socache_dbm mod_socache_memcache mod_socache_shmcb mod_status mod_substitute mod_suexec mod_unique_id mod_unixd mod_userdir mod_version mod_vhost_alias mod_dav mod_dav_fs mod_dav_lock mod_lua prefork mod_proxy mod_lbmethod_bybusyness mod_lbmethod_byrequests mod_lbmethod_bytraffic mod_lbmethod_heartbeat mod_proxy_ajp mod_proxy_balancer mod_proxy_connect mod_proxy_express mod_proxy_fcgi mod_proxy_fdpass mod_proxy_ftp mod_proxy_http mod_proxy_scgi mod_proxy_wstunnel mod_ssl mod_systemd mod_cgi mod_perl mod_php7
以上顯示 php7 安裝成功！

⑤ CentOS 6.5 使用yum安裝lamp環境 php是5.3.3的 太低了

簡單介紹一下，如何在CentOS上安裝PHP5.6。
配置yum源
追加CentOS 6.5的epel及remi源。

#rpm-Uvh
#rpm-Uvh

#yuminstallepel-release
#rpm-ivh

#yumlist--enablerepo=remi--enablerepo=remi-php56|grepphp

#yuminstall--enablerepo=remi--enablerepo=remi-php56phpphp-opcachephp-develphp-mbstringphp-mcryptphp-mysqlndphp-phpunit-PHPUnitphp-pecl-xdebugphp-pecl-xhprof

#php--version
PHP5.6.0(cli)(built:Sep3201419:51:31)
Copyright(c)1997-2014ThePHPGroup
ZendEnginev2.6.0,Copyright(c)1998-2014ZendTechnologies
withZendOPcachev7.0.4-dev,Copyright(c)1999-2014,byZendTechnologies
withXdebugv2.2.5,Copyright(c)2002-2014,byDerickRethans

⑥ 阿里雲上的centos 7.2怎麼yum安裝php 5.6

阿里雲Centos配置php環境 方法/步驟 打開putty工具，在主機名稱中輸入阿里雲ecs的IP地址和埠。輸入好後，點擊「打開」進入。 進入putty界面後，輸入系統賬號和密碼。提示一下密碼是暗文的，輸入密碼時不會顯示在屏幕上的。 進入系統後，輸入命令進行安裝。 安裝apache: yum install httpd httpd-devel 啟動apache: /etc/init.d/httpd start 此時輸入伺服器的IP地址，應該看到apache的服務頁面，埠不用輸，apache默認就是使用80埠 安裝mysql: yum install mysql mysql-server 啟動mysql: /etc/init.d/mysqld start 安裝php yum install php php-devel 重啟apache使php生效 /etc/init.d/httpd restart 安裝php的擴展 yum install php-mysql php-gd php-imap php-ldap php-odbc php-pear php-xml php-xmlrpc 安裝完擴展之後需要再次重啟apache /etc/init.d/httpd restart 最後在目錄：/var/www/html/下建立一個PHP文件 代碼內容如下： <?php phpinfo(); ?> 當你訪問這個文件時，就能看到php版本以及所安裝的插件信息了。 4 安裝完所有的軟體後，安裝VPSMate面板。它提供界面化操作文件和控制軟體。 本數據來源於網路地圖，最終結果以網路地圖最新數據為准。 我現在使用的是小鳥雲。他們官網最近有活動蠻優惠，可以去看看！

⑦ CentOS6.5 用yum安裝php報錯

我之前安裝也遇到過這個情況，建議用xampp這個軟體集成包，把你的mysql和apacher卸載了，直接用這個就行，找個linux版本的。

⑧ centos6.6下怎麼用yum安裝php

是一個在Fedora和RedHat以及SUSE中的Shell前端軟體包管理器。可以自動處理依賴性關系，並且一次安裝所有依賴的軟體包，無須繁瑣地一次次下載、安裝。使用yum安裝PHP的前提准備：
1、yum update 檢查一下系統更新 初次安裝可能更新的時間會比較長，請耐心等待。
2、yum install gcc gcc-c++ ;安裝gcc軟體編譯環境。

[root@lamp ~]# yum install php php-mysql php-common php-gd php-mbstring php-mcrypt php-devel php-xml
安裝好php之後重啟httpd ： /etc/init.d/httpd restart
設置成開機啟動：
chkconfig httpd on
chkconfig mysqld on
整個過程我們不需要修改/etc/httpd/conf/httpd.conf 這就是版本高了的好處~