centosphp56安裝教程

㈠ centos 下如何通過yum安裝最新的php

remi源，這里的php版本較新，5.4，5.5，5.6都有，還有配套的各種擴展
rpms.famillecollet.com


Centos 6.默認下沒有安裝php組件，因此我們需要輸入命令：yum -y install php 回車如下圖。
不用管，程序會自動完成安裝及配置。

Zend組件，Centos 6.3 裡面是沒有的，需要手動下載，及安裝教程請點擊下面鏈接：

到此前期的准備工作已完成，下面就要對Apache進行配置
輸入命令 pd/conf/httpd.conf //打開Apache配置文件，
找到ServerTokens OS將「OS」改為「Prod 「 。//顯示伺服器運行錯誤信息。與下圖一樣，那麼Apache你就配置成功了，如果不一樣請仔細對比上面的教程是不是那個步驟少了#及字母拼寫錯了。
到此php運行環境便配置成功啦。

㈡ centos6.5怎麼安裝php5.5

1.******已安裝Nginx******
ps -aux | grep nginx
netstat -anptu | grep 80

2.清除系統中php痕跡：
yum remove php
rm -rvf /etc/php
rm -rvf /etc/php.ini
rm -f /usr/bin/php

3.安裝php所需軟體包：
tar zxvf autoconf-2.68.tar.gz -C /usr/src
cd /usr/src/autoconf-2.68/
./configure && make && make install
tar zxvf libiconv-1.14.tar.gz -C /usr/src
cd /usr/src/libiconv-1.14/
./configure && make && make install
tar zxvf libmcrypt-2.5.8.tar.gz -C /usr/src
cd /usr/src/libmcrypt-2.5.8/
./configure && make && make install
ldconfig
cd libltdl/
./configure --enable-ltdl-install
make && make install
export LD_LIBRARY_PATH=/usr/local/lib:$LD_LIBRARY_PATH
tar zxvf mhash-0.9.9.9.tar.gz -C /usr/src
cd /usr/src/mhash-0.9.9.9/
./configure && make && make install
tar zxvf mcrypt-2.6.8.tar.gz -C /usr/src
cd /usr/src/mcrypt-2.6.8/
./configure && make && make install

4.載入php動態模塊：
ln -s /usr/local/lib/libmcrypt.la /usr/lib64/libmcrypt.la
ln -s /usr/local/lib/libmcrypt.so /usr/lib64/libmcrypt.so
ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib64/libmcrypt.so.4
ln -s /usr/local/lib/libmcrypt.so.4.4.8
/usr/lib64/libmcrypt.so.4.4.8
ln -s /usr/local/lib/libmhash.a /usr/lib64/libmhash.a
ln -s /usr/local/lib/libmhash.la /usr/lib64/libmhash.la
ln -s /usr/local/lib/libmhash.so /usr/lib64/libmhash.so
ln -s /usr/local/lib/libmhash.so.2 /usr/lib64/libmhash.so.2
ln -s /usr/local/lib/libmhash.so.2.0.1
/usr/lib64/libmhash.so.2.0.1
cp -R /usr/lib64/libpng.* /usr/lib/
cp -R /usr/lib64/libjpeg.* /usr/lib/
echo "/lib" >> /etc/ld.so.conf
echo "/usr/lib" >> /etc/ld.so.conf
echo "/usr/lib64" >> /etc/ld.so.conf
echo "/usr/local/lib" >> /etc/ld.so.conf
echo "* soft nproc 65535" >> /etc/security/limits.conf
echo "* hard nproc 65535" >> /etc/security/limits.conf
echo "* soft nofile 65535" >> /etc/security/limits.conf
echo "* hard nofile 65535" >> /etc/security/limits.conf
echo "fs.file-max=65535" >> /etc/sysctl.conf

ldconfig

5.解壓、配置、編譯、安裝php：
tar zxvf php-5.5.25.tar.gz -C /usr/src
cd /usr/src/php-5.5.25/
./configure --prefix=/usr/local/php \
--with-config-file-path=/usr/local/php/etc \
--enable-fpm \
--with-fpm-user=www \
--with-fpm-group=www \
--with-mysql=mysqlnd \
--with-mysqli=mysqlnd \
--with-pdo-mysql=mysqlnd \
--with-iconv-dir \
--with-freetype-dir \
--with-jpeg-dir \
--with-png-dir \
--with-zlib \
--with-libxml-dir=/usr \
--enable-xml \
--enable-opcache \
--disable-rpath \
--enable-bcmath \
--enable-shmop \
--enable-sysvsem \
--enable-inline-optimization \
--with-curl \
--enable-mbregex \
--enable-mbstring \
--with-mcrypt \
--enable-ftp \
--with-gd \
--enable-gd-native-ttf \
--with-openssl \
--with-mhash \
--enable-pcntl \
--enable-sockets \
--with-xmlrpc \
--enable-zip \
--enable-soap \
--without-pear \
--with-gettext \
--disable-fileinfo
make ZEND_EXTRA_LIBS='-liconv'
make install

6.鏈接php可執行文件：
ln -s /usr/local/php/bin/php /usr/bin/php
ln -s /usr/local/php/bin/phpize /usr/bin/phpize
ln -s /usr/local/php/sbin/php-fpm /usr/bin/php-fpm

7.編輯php.ini配置文件：
cp /usr/src/php-5.5.25/php.ini-proction
/usr/local/php/etc/php.ini
ln -s /usr/local/php/etc/php.ini /etc/php.ini
vim /etc/php.ini
[PHP]
engine = On
zend.ze1_compatibility_mode = Off
short_open_tag = On
asp_tags = Off
precision
= 12
y2k_compliance = On
output_buffering = On
zlib.output_compression = Off
implicit_flush = Off
unserialize_callback_func=
serialize_precision = 100
safe_mode = Off
safe_mode_gid = Off
safe_mode_include_dir =
safe_mode_exec_dir =
safe_mode_allowed_env_vars = PHP_
safe_mode_protected_env_vars = LD_LIBRARY_PATH
disable_functions =
passthru,exec,system,chroot,scandir,chgrp,chown,shell_exec,proc_open,proc_get_status,ini_alter,ini_restore,dl,openlog,syslog,readlink,symlink,popepassthru,stream_socket_server,fsocket
disable_classes =
expose_php = On
error_reporting = E_ALL & ~E_NOTICE
display_errors = On
display_startup_errors = Off
log_errors = Off
log_errors_max_len = 1024
ignore_repeated_errors = Off
ignore_repeated_source = Off
report_memleaks = On
track_errors = Off
variables_order = "EGPCS"
register_globals = Off
register_long_arrays = Off
register_argc_argv = On
auto_globals_jit = On
post_max_size = 50M
magic_quotes_gpc = Off
magic_quotes_runtime = Off
magic_quotes_sybase = Off
auto_prepend_file =
auto_append_file =
default_mimetype = "text/html"
doc_root =
user_dir =
extension_dir =
"/usr/local/php/lib/php/extensions/no-debug-non-zts-20121212/"
enable_dl = On
cgi.fix_pathinfo=0
file_uploads = On
upload_max_filesize = 50M
max_file_uploads = 20
allow_url_fopen = On
allow_url_include = Off
default_socket_timeout = 60
[Date]
date.timezone = PRC
[filter]
[iconv]
[sqlite]
[Pcre]
[Syslog]
define_syslog_variables = Off
[mail function]
SMTP = localhost
smtp_port = 25
[SQL]
sql.safe_mode = Off
[ODBC]
odbc.allow_persistent = On
odbc.check_persistent = On
odbc.max_persistent = -1
odbc.max_links = -1
odbc.defaultlrl = 4096
odbc.defaultbinmode = 1
[MySQL]
mysql.allow_persistent = On
mysql.max_persistent = -1
mysql.max_links = -1
mysql.default_port =
mysql.default_socket =
mysql.default_host =
mysql.default_user =
mysql.default_password =
mysql.connect_timeout = 60
mysql.trace_mode = Off
[MySQLi]
mysqli.max_links = -1
mysqli.default_port = 3306
mysqli.default_socket =
mysqli.default_host =
mysqli.default_user =
mysqli.default_pw =
mysqli.reconnect = Off
[mSQL]
msql.allow_persistent = On
msql.max_persistent = -1
msql.max_links = -1
[OCI8]
[PostgresSQL]
pgsql.allow_persistent = On
pgsql.auto_reset_persistent = Off
pgsql.max_persistent = -1
pgsql.max_links = -1
pgsql.ignore_notice = 0
pgsql.log_notice = 0
[Sybase]
sybase.allow_persistent = On
sybase.max_persistent = -1
sybase.max_links = -1
sybase.min_error_severity = 10
sybase.min_message_severity = 10
sybase.compatability_mode = Off
[Sybase-CT]
sybct.allow_persistent = On
sybct.max_persistent = -1
sybct.max_links = -1
sybct.min_server_severity = 10
sybct.min_client_severity = 10
[bcmath]
bcmath.scale = 0
[browscap]
[Informix]
ifx.default_host =
ifx.default_user =
ifx.default_password =
ifx.allow_persistent = On
ifx.max_persistent = -1
ifx.max_links = -1
ifx.textasvarchar = 0
ifx.byteasvarchar = 0
ifx.charasvarchar = 0
ifx.blobinfile = 0
ifx.nullformat = 0
[Session]
session.save_handler = files
session.use_cookies = 1
session.name = PHPSESSID
session.auto_start = 0
session.cookie_lifetime = 0
session.cookie_path = /
session.cookie_domain =
session.cookie_httponly =
session.serialize_handler = php
session.gc_probability = 1
session.gc_divisor
= 100
session.gc_maxlifetime = 1440
session.bug_compat_42 = 1
session.bug_compat_warn = 1
session.referer_check =
session.entropy_length = 0
session.entropy_file =
session.cache_limiter = nocache
session.cache_expire = 180
session.use_trans_sid = 0
session.hash_function = 0
session.hash_bits_per_character = 4
url_rewriter.tags =
"a=href,area=href,frame=src,input=src,form=,fieldset="
[MSSQL]
mssql.allow_persistent = On
mssql.max_persistent = -1
mssql.max_links = -1
mssql.min_error_severity = 10
mssql.min_message_severity = 10
mssql.compatability_mode = Off
mssql.secure_connection = Off
[Assertion]
[COM]
[mbstring]
[FrontBase]
[gd]
[exif]
[Tidy]
tidy.clean_output = Off
[soap]
soap.wsdl_cache_enabled=1
soap.wsdl_cache_dir="/tmp"
soap.wsdl_cache_ttl=86400
[Zend Optimizer]
zend_extension =
/usr/local/php/lib/php/extensions/no-debug-non-zts-20121212/opcache.so
zend_loader.enable = 1
zend_loader.disable_licensing = 0
zend_loader.obfuscation_level_support = 3

8.編輯php-fpm.conf配置文件：
cp /usr/local/php/etc/php-fpm.conf.default
/usr/local/php/etc/php-fpm.conf
vim /usr/local/php/etc/php-fpm.conf
[global]
pid = /home/php/pid/php-fpm.pid
error_log = /home/php/log/php-fpm_error.log
log_level = notice
[www]
listen = 127.0.0.1:9000
listen.backlog = -1
listen.allowed_clients = 127.0.0.1
listen.owner = www
listen.group = www
listen.mode = 0666
user = www
group = www
pm = dynamic
pm.max_children = 10
pm.start_servers = 2
pm.min_spare_servers = 1
pm.max_spare_servers = 6
request_terminate_timeout = 100
request_slowlog_timeout = 0
slowlog = /home/php/log/slow.log

9.編寫php-fpm啟動腳本
vim /etc/init.d/php-fpm
#!/bin/sh
# chkconfig:
2345 90
10
#
Description:
Start and
Stop php-fpm
# Provides:

php-fpm
#
Default-Start:
2 3 4 5
#
Default-Stop:
0 1 6
prefix=/usr/local/php
exec_prefix=${prefix}
php_fpm_BIN=${prefix}/sbin/php-fpm
php_fpm_CONF=${prefix}/etc/php-fpm.conf
php_fpm_PID=/home/php/pid/php-fpm.pid
php_opts="--fpm-config $php_fpm_CONF --pid $php_fpm_PID"
wait_for_pid () {
try=0
while test $try -lt 35 ; do
case "$1" in
'created')
if [ -f "$2" ] ; then
try=''
break
fi
;;
'removed')
if [ ! -f "$2" ] ; then
try=''
break
fi
;;
esac
echo -n .
try=`expr $try + 1`
sleep 1
done
}
case "$1" in
start)
echo -n "Starting php-fpm..."
$php_fpm_BIN --daemonize $php_opts
if [ "$?" != 0 ] ; then
echo " failed"
exit 1
fi
wait_for_pid created $php_fpm_PID
if [ -n "$try" ] ; then
echo " failed"
exit 1
else
echo " done"
fi
;;
stop)
echo -n "Stoping php-fpm..."
if [ ! -r $php_fpm_PID ] ; then
echo "warning, no pid file found - php-fpm is not running ?"
exit 1
fi
kill -QUIT `cat $php_fpm_PID`
wait_for_pid removed $php_fpm_PID
if [ -n "$try" ] ; then
echo " failed. Use force-quit"
exit 1
else
echo " done"
fi
;;
force-quit)
echo -n "Terminating php-fpm "
if [ ! -r $php_fpm_PID ] ; then
echo "warning, no pid file found - php-fpm is not running ?"
exit 1
fi
kill -TERM `cat $php_fpm_PID`
wait_for_pid removed $php_fpm_PID
if [ -n "$try" ] ; then
echo " failed"
exit 1
else
echo " done"
fi
;;
restart)
$0 stop
$0 start
;;
reload)
echo -n "Reload service php-fpm "
if [ ! -r $php_fpm_PID ] ; then
echo "warning, no pid file found - php-fpm is not running ?"
exit 1
fi
kill -USR2 `cat $php_fpm_PID`
echo " done"
;;
*)
echo "Usage: $0 {start|stop|force-quit|restart|reload}"
exit 1
;;
esac

10.創建目錄並修改許可權，重啟nginx服務：
mkdir -p /home/php/log
mkdir -p /home/php/pid
chown -R www:www /home/php/log
chown -R www:www /home/php/pid
service nginx restart

11.添加php-fpm系統服務：
chmod +x /etc/init.d/php-fpm
chkconfig --add php-fpm
chkconfig --level 2345 php-fpm on
chkconfig --list | grep php-fpm

12.啟動php-fpm服務：
service php-fpm start
ps -aux | grep php-fpm
netstat -anptu | grep 9000

13.配置php測試頁：
vim /home/www/html/phpinfo.php

㈢ centos怎麼安裝php5.6

php5.6如果有rpm包的話，可以yum安裝，不過好像rpm包版本沒有呢么高，這樣你就要下載php的 源碼包自己編譯安裝了，有一些三方源可能有那麼高版本的php，，這個需要換源，看你想怎麼安裝

㈣ 如何在centos7上安裝php

您好，安裝PHP的方式可以一步一步的按照教程去安裝，這個可以到網上搜一搜，因為步驟太多，我就不復制粘貼了。但是我這里最推薦的就是使用phpstudy一鍵安裝，沒錯，就是在linux上一鍵安裝，可以去試一試。

黑馬程序員的PHP是國內最早開設的真正人工智慧課程。課程全面系統，緊跟時代潮流。

㈤ 怎麼安裝PHP環境

LAMP/LNMP 環境搭建

一．檢查系統環境

1.確認centos版本

[root@localhost ~]# cat /etc/redhat-release

2.檢查是否安裝過apache

rpm -qa | grep httpd

或者：

apachectl -v

或者：

httpd -v

3.檢查是否安裝過Mysql

service mysqld start

如果未被識別則沒有安裝

如果系統安裝過，或者安裝失敗，清理一下系統

4.清理Mysql痕跡

yum remove mysql

rm -f /etc/my.cnf

5.卸載Apache包

rpm -qa|grep httpd

注意：如果是新的系統或者你從來沒有嘗試安裝過，則以上步驟省略

二．安裝Apache、PHP、Mysql

停止防火牆服務

[root@localhost ~]# systemctl stop firewalld.service

禁用防火牆開機啟動服務

[root@localhost ~]# systemctl disable firewalld.service

1.安裝apache

[root@localhost ~]# yum -y install httpd

2.安裝php

[root@localhost ~]# yum -y install php

3.安裝php-fpm

[root@localhost ~]# yum -y install php-fpm

4.安裝Mysql

[root@localhost ~]# yum -y install mysql

5.安裝 mysql-server

[root@localhost ~]# yum install mariadb-server

CentOS 7+ 版本將MySQL資料庫軟體從默認的程序列表中移除，用mariadb代替了，entos7配置教程上，大多都是安裝mariadb，因為centos7默認將mariadb視作mysql。

因為mysql被oracle收購後，原作者擔心mysql閉源，所以又寫了一個mariadb，這個資料庫可以理解為mysql的分支。如果需要安裝mariadb，只需通過yum就可。

6.安裝 php-mysql

[root@localhost ~]# yum -y install php-mysql

三.安裝基本常用擴展包

1.安裝Apache擴展包

yum -y install httpd-manual mod_ssl mod_perl mod_auth_mysql

2.安裝PHP擴展包

yum -y install php-gd php-xml php-mbstring php-ldap php-pear php-xmlrpc php-devel

3.安裝Mysql擴展包

yum -y install mysql-connector-odbc mysql-devel libdbi-dbd-mysql

四.配置Apache、mysql開機啟動

重啟Apache、mysql服務(注意這里和centos6有區別,Cenots7+不能使用6的方式)

systemctl start httpd.service #啟動apache

systemctl stop httpd.service #停止apache

systemctl restart httpd.service #重啟apache

systemctl enable httpd.service #設置apache開機啟動

重啟資料庫

#啟動MariaDB

[root@localhost ~]# systemctl start mariadb.service

#停止MariaDB

[root@localhost ~]# systemctl stop mariadb.service

#重啟MariaDB

[root@localhost ~]# systemctl restart mariadb.service

#設置開機啟動

[root@localhost ~]# systemctl enable mariadb.service

五．配置Mysql

初次安裝mysql是沒有密碼的,我們要設置密碼，mysql的默認賬戶為root

方式1：設置 MySQL 數據 root 賬戶的密碼：

[root@localhost ~]# mysql_secure_installation

當出現如下提示時候直接按回車：

Enter current password for root

出現如下再次回車：

Set root password? [Y/n]

出現如下提示輸入你需要設置的密碼，這里輸入了root,輸入密碼是不顯示的，回車後再輸入一次確認：

New password:

接下來還會有四個確認，分別是：

Remove anonymous users? [Y/n]

Disallow root login remotely? [Y/n]

Remove test database and access to it? [Y/n]

Reload privilege tables now? [Y/n]

直接回車即可。

方式2：進入mysql mysql -r

修改mysql密碼：set password for 'root'@'localhost'=password('root');

mysql授權遠程連接（navicat等）： grant all on *.* to root identified by 'root';

六．測試環境

我們在瀏覽器地址欄輸入http://ip/，正常顯示,說明我們的lamp 環境搭建成功

七．安裝nginx

yum install yum-priorities -y

wget http://nginx.org/packages/centos/7/noarch/RPMS/nginx-release-centos-7-0.el7.ngx.noarch.rpm

rpm -ivh nginx-release-centos-7-0.el7.ngx.noarch.rpm

yum install nginx

Nginx 版本號可變更http://nginx.org/packages/centos/7/noarch/RPMS/$版本

八．配置nginx

1.nginx啟動，停止，重啟

systemctl start nginx.service #啟動nginx

systemctl stop nginx.service #停止

systemctl restart nginx.service #重啟

systemctl enable nginx.service #設置開機啟動

• 更改nginx埠號（根據自己需求）

cd /etc/nginx/conf.d/

vim default.conf

把listen 80改成listen 81

3.訪問http://ip:81即可看到nginx首頁

安裝完成訪問時候需要啟動php-fpm,不重啟訪問會出現下載文件，重啟命令如下

systemctl start php-fpm.service #啟動php-fpm

systemctl enable php-fpm.service #設置開機啟動

4.更改nginx配置文件識別php

vi /etc/nginx/conf.d/default.conf，把之前的#給去掉就可以了，順手改一下

location ~ .php$ {

root html;

fastcgi_pass 127.0.0.1:9000;

fastcgi_index index.php;

fastcgi_param SCRIPT_FILENAME /usr/share/nginx/html/$fastcgi_script_name;

include fastcgi_params;

}

方法二 安裝nginx

yum install nginx

啟動nginx，並設置為開機啟動

systemctl start nginx

systemctl enable nginx

5.在 /usr/share/nginx/html中新建一個test.php

訪問http://ip:81/test.php即可看到php頁面

修改完成配置記得啟動apache 和php-fpm 哦！

九．負載配置

upstream site{

server 172.16.170.138;

server 172.16.170.139;

}

server {

listen 80;

server_name localhost;

#charset koi8-r;

#access_log /var/log/nginx/log/host.access.log main;

location / {

root /usr/share/nginx/html;

index index.html index.htm;

proxy_pass http://site;

}

apache 默認目錄 /var/www/html

nginx 默認目錄 /usr/share/nginx/html

升級php版本

centos7 默認安裝php是5.4

查看yum的可安裝的php版本列表

yum provides php

開始升級PHP更新源：

rpm -Uvh https://mirror.webtatic.com/yum/el7/epel-release.rpm

rpm -Uvh https://mirror.webtatic.com/yum/el7/webtatic-release.rpm

yum remove php-common -y #移除系統自帶的php-common

php72版本

yum install -y php72w php72w-opcache php72w-xml php72w-mcrypt php72w-gd php72w-devel php72w-mysql php72w-intl php72w-mbstring

php56版本

yum install -y php56w php56w-opcache php56w-xml php56w-mcrypt php56w-gd php56w-devel php56w-mysql php56w-intl php56w-mbstring #安裝依賴包

查看php版本

php -v

安裝php fpm：

yum install php72w-fpm

yum provides php-fpm #因為我是准備搭建lnmp，所以安裝php-fpm，這里會提示多個安裝源，選擇5.6版本的安裝就可以了

yum install php56w-fpm-5.6.31-1.w7.x86_64 -y

systemctl start php-fpm.service 【啟動】

systemctl enable php-fpm.service【開機自啟動】

CentOS yum有時出現「Could not retrieve mirrorlist 」的解決辦法——resolv.conf的配置

原因：沒有配置resolv.conf

解決方法:

到/etc目錄下配置resolv.conf加入nameserver IP,如：

nameserver 8.8.8.8

nameserver 8.8.4.4

search localdomain

保存再次運行上面的命令就可以。

https://blog.csdn.net/mao834099514/article/details/73470001

nginx目錄 ： /usr/share/nginx/html

/etc/nginx/conf.d/default.conf nginx配置目錄

apache目錄 ： /var/www/html

/etc/httpd/conf/httpd.conf apache配置文件

nginx 配置域名

cd /etc/nginx

cp default.conf imooc.conf

修改server_name imooc.test.com 以及項目目錄

配置虛擬域名 windows 訪問需要在host增加 linuxip

ServerName www.nine.com

DocumentRoot "/var/www/html/learnlaravel/public"

Options Indexes FollowSymLinks

AllowOverride All

Require all granted

關閉防火牆

setenforce 0

㈥ linux centos 怎麼安裝 php編程 軟體

Gettext
1 首先進入到php源碼包中
cd /opt/php-5.1.2/ext/gettext
2 在gettext文件夾下產生configure文件
/opt/php/bin/phpize
3 配置編譯
./configure --with-php-config=/opt/php/bin/php-config --with-gettext
make && make install
4 在/opt/php/lib/php/extensions下產生一個gettext.so文件
5 確定 php.ini文件中的extension_dir=/opt/php/lib/php/extensions 跟 extension=gettext.so
6 重新編譯 php
Zlib
1 首先進入到php源碼包中
cd /opt/php-5.1.2/ext/zlib
2 在zlib文件夾下產生configure文件
/opt/php/bin/phpize
3 配置編譯
./configure --with-php-config=/opt/php/bin/php-config --with-zlib
make && make install
4 在/opt/php/lib/php/extensions下產生一個zlib.so文件
5 確定 php.ini文件中的extension_dir=/opt/php/lib/php/extensions 跟 extension=zlib.so
6 重新編譯 php
mbString
配製mbstring擴展
1 運行 /opt/php/bin/phpize
2 進入到 php源碼包中的ext/mbstring下
cd /opt/php-5.1.2/ext/mbstring
./configure --with-php-config=/opt/php/bin/php-config --enable-mbstring
make && make install
3 這樣就在/opt/php/lib/php/extensions下生成一個mbstring.so
4然後保證extension_dir指向正確的位置，extension=php_mbstring.dll開啟
這樣mbstring就開啟了
Mod_rewrite
以RHEL5為例
1）首次安裝apache，在編譯時增加--enable-rewrite選項。
如./configure --prefix=/usr/local/apachel --enable-so --enable-mods-shared=all --enable-rewrite --enable-cache
2）增加mod_rewrite模塊
# find mod_rewrite.c //在apache的源碼安裝目錄中尋找mod_rewrite.c文件
一般會在httpd-2.28/moles/mappers下
# /opt/httpd/bin/apxs -c mod_rewrite.c //apxs應指定絕對路徑，在你當前正在使用apache的bin目錄里
# /opt/httpd/bin/apxs -i -a -n mod_rewrite mod_rewrite.la
如果沒有什麼錯誤的話，應該在你的apache的moles目錄中編譯出一個mod_rewrite.so文件。
編輯httpd.conf文件，確認httpd.conf中已經包含mod_rewrite.so的載入語句，如下：
LoadMole rewrite_mole moles/mod_rewrite.so
這時，你的apache應該已經支持rewrite了。
重啟apache即可。

㈦ linux centos 7 下用yum 安裝iso鏡像里自帶的php5.4.16版本的但是沒有php-fqm文件不知道怎麼重啟php服務

systemctl restart php-fpm.service #這條命令是重啟php服務
下面是一個比較靠譜的php安裝步驟：
先刪除已有的php版本 ，執行下面的命令刪除php
yum remove php-common
然後像安裝那樣問你是否繼續的，輸入yes即可

添加 yum 源
CentOS 6.x 的源
# rpm -Uvh http://download.Fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
# rpm -Uvh http://rpms.famillecollet.com/enterprise/remi-release-6.rpm

安裝 PHP
# yum install --enablerepo=remi,remi-php56 php php-opcache php-pecl-apcu php-devel php-mbstring php-mcrypt php-mysqlnd php-phpunit-PHPUnit php-pecl-xdebug php-pecl-xhprof php-pdo php-pear php-fpm php-cli php-xml php-bcmath php-process php-gd php-common
註：安裝5.6版本為remi-php56,安裝5.5版本為remi-php55

㈧ centos 下的nginx 怎麼安裝php5.6

你好，你可以去後盾人看下視頻，後盾人有海量學習視頻 高清畫質 視頻質量好 。

㈨ centos下，我怎麼安裝php和apache

查看是否有RPM包安裝的這兩個軟體

rpm -qa |grep httpd #查看是否安裝APACHE
rpm -qa |grep hph #查看是否安裝php
如果有安裝的話執行上兩條命令時會顯示已相應經安裝的文件名，如果什麼都沒顯示的話就說明沒有安裝
查看是否有編譯安裝的這兩個軟體
find / -name apaceh
find / -name php
如果有安裝的話會有文件顯示，沒有顯示的話說明沒安裝
要安裝這兩個軟體最方便的就是將這台機器連上網然後執行以下兩條命令
yum install apache
yum install php

㈩ centos6.5的php5.3.3這個版本怎麼升級到5.6

簡單介紹一下，如何在CentOS上安裝PHP5.6。

配置yum源

追加CentOS 6.5的epel及remi源。

#rpm-Uvhhttp://ftp.iij.ad.jp/pub/linux/fedora/epel/6/x86_64/epel-release-6-8.noarch.rpm
#rpm-Uvhhttp://rpms.famillecollet.com/enterprise/remi-release-6.rpm

以下是CentOS 7.0的源。

#yuminstallepel-release
#rpm-ivhhttp://rpms.famillecollet.com/enterprise/remi-release-7.rpm

使用yum list命令查看可安裝的包(Packege)。

#yumlist--enablerepo=remi--enablerepo=remi-php56|grepphp

安裝PHP5.6

yum源配置好了，下一步就安裝PHP5.6。

#yuminstall--enablerepo=remi--enablerepo=remi-php56phpphp-opcachephp-develphp-mbstringphp-mcryptphp-mysqlndphp-phpunit-PHPUnitphp-pecl-xdebugphp-pecl-xhprof

用PHP命令查看版本。

#php--version
PHP5.6.0(cli)(built:Sep3201419:51:31)
Copyright(c)1997-2014ThePHPGroup
ZendEnginev2.6.0,Copyright(c)1998-2014ZendTechnologies
withZendOPcachev7.0.4-dev,Copyright(c)1999-2014,byZendTechnologies
withXdebugv2.2.5,Copyright(c)2002-2014,byDerickRethans

在這里安裝的版本是PHP5.6.0，細心的用戶可能已經發現ZendGuardLoader變成Zend OPcahe了。

對從PHP5.5開始PHP代碼緩存從APC變成了Zend OPcache了。

更多問題可以去php中文網問答社區提問http://www.php.cn/wenda.html，大神在線幫你解決，希望對你有幫助