系統自帶的那個2.7版本不要去升級，否則很多系統的python腳本不能運行的；
升級本身自己安裝3.x的版本:
如果yum源中更新了那麼是 yum update python
如果是自己下載的rpm包，那麼 rpm -Uvh python的包
如果是源代碼文件; 那麼看源代碼的install文件
『貳』 請問如何將Linux得python3.5.2升級到python3.6-3.7啊
安裝python可使用命令sudo apt install python3，
嘗試使用sudo apt upgrade python來更新。
拓展：
sudo apt install <包名>可安裝軟體；
sudo apt upgrade <包名>可升級軟體；
sudo apt autoremove <包名>可卸載軟體
『叄』 linux怎麼升級python版本
如果是redhat/centos, 使用sudo yum -y update即可. 如果源里的新版本不能達到你的要求, 你可以去python.org下載最新版並手動編譯, 如果python.org里的最新版仍不能達到你的要求, 你可以對源碼進行修改編譯並測試.
『肆』 如何升級linux的python版本
你需要高版本的話，可以再安裝一個；linux os一般自帶2.7版本的，因為有好多應用需要用到，使用高版本的兼容性應該就會出問題了
『伍』 red hat怎麼升級python
從今天開始學習Python!看了一下虛擬機RedHat中的python，發現還是原生的2.4.3，所以決兆慶吵定升級一下
[root@linuxidc ~]# python
Python 2.4.3 (#1, May 5 2011, 16:39:10)
[GCC 4.1.2 20080704 (Red Hat 4.1.2-50)] on linux2
Type "help", "right", "credits" or "license" for more information.
>>>
[root@linuxidc ~]#
1.下載z最新版本的python
[root@linuxidc ~]# wget http://python.org/ftp/python/2.7.6/Python-2.7.6.tgz
2.解壓及編譯
[root@linuxidc ~]# tar xvf Python-2.7.2.tar.bz2
[root@linuxidc Python-2.7.6]# ./configure --prefix=/usr/local/python27
[root@linuxidc Python-2.7.6]# make
[root@linuxidc Python-2.7.6]# make install
[root@linuxidc Python-2.7.6]# ls /usr/local/python27/ -al
total 28
drwxr-xr-x 6 root root 4096 Mar 21 01:01 .
drwxr-xr-x 13 root root 4096 Mar 21 01:01 ..
drwxr-xr-x 2 root root 4096 Mar 21 01:01 bin
drwxr-xr-x 3 root root 4096 Mar 21 01:01 include
drwxr-xr-x 4 root root 4096 Mar 21 01:01 lib
drwxr-xr-x 3 root root 4096 Mar 21 01:01 share
3.覆差晌蓋原有的python鏈接
[root@linuxidc Python-2.7.6]# mv /usr/bin/python /usr/bin/python_old
[root@linuxidc Python-2.7.6]# ln -s /usr/local/python27/bin/python /usr/bin/
[root@linuxidc Python-2.7.6]# python
Python 2.7.6 (default, Mar 21 2014, 01:00:09)
[GCC 4.1.2 20080704 (Red Hat 4.1.2-44)] on linux2
Type "help", "right", "credits" or "license" for more information.
>>>
此時已經可以正常使族侍用python2.7了，但是因為yum是使用的2.4的版本來用的，現在輸入一下yum就會報錯
[root@linuxidc Python-2.7.6]# yum
There was a problem importing one of the Python moles
required to run yum. The error leading to this problem was:
No mole named yum
Please install a package which provides this mole, or
verify that the mole is installed correctly.
It's possible that the above mole doesn't match the
current version of Python, which is:
2.7.6 (default, Mar 21 2014, 01:00:09)
[GCC 4.1.2 20080704 (Red Hat 4.1.2-44)]
If you cannot solve this problem yourself, please go to
the yum faq at:
http://wiki.linux.ke.e/YumFaq
5.修改yum
[root@linuxidc Python-2.7.6]# vim /usr/bin/yum
#!/usr/bin/python #修改此處為2.4的位置
[root@linuxidc Python-2.7.6]# vim /usr/bin/yum
#!/usr/bin/python2.4
yum 可以使用了!
[root@linuxidc Python-2.7.6]# yum
Loaded plugins: rhnplugin, security
You need to give some command
usage: yum [options] COMMAND
List of Commands:
check-update Check for available package updates
clean Remove cached data
deplist List a package's dependencies
erase Remove a package or packages from your system
groupinfo Display details about a package group
groupinstall Install the packages in a group on your system
grouplist List available package groups
groupremove Remove the packages in a group from your system
help Display a helpful usage message
info Display details about a package or group of packages
info-security Returns security data for the packages listed, that affects your system
install Install a package or packages on your system
list List a package or groups of packages
list-security Returns security data for the packages listed, that affects your system
localinstall Install a local RPM
makecache Generate the metadata cache
provides Find what package provides the given value
reinstall reinstall a package
repolist Display the configured software repositories
resolvedep Determine which package provides the given dependency
search Search package details for the given string
shell Run an interactive yum shell
update Update a package or packages on your system
update-minimal Works like update, but goes to the 'newest' package match which fixes a problem that affects your system
upgrade Update packages taking obsoletes into account
options:
-h, --help show this help message and exit
-t, --tolerant be tolerant of errors
-C run entirely from cache, don't update cache
-c [config file] config file location
-R [minutes] maximum command wait time
-d [debug level] debugging output level
--showplicates show plicates, in repos, in list/search commands
-e [error level] error output level
-q, --quiet quiet operation
-v, --verbose verbose operation
-y answer yes for all questions
--version show Yum version and exit
--installroot=[path] set install root
--enablerepo=[repo] enable one or more repositories (wildcards allowed)
--disablerepo=[repo] disable one or more repositories (wildcards allowed)
-x [package], --exclude=[package]
exclude package(s) by name or glob
--disableexcludes=[repo]
disable exclude from main, for a repo or for
everything
--obsoletes enable obsoletes processing ring updates
--noplugins disable Yum plugins
--nogpgcheck disable gpg signature checking
--disableplugin=[plugin]
disable plugins by name
--enableplugin=[plugin]
enable plugins by name
--skip-broken skip packages with depsolving problems
--security Include security relevant packages
--cve=CVE Include packages needed to fix the given CVE
--bz=BZ Include packages needed to fix the given BZ
--advisory=ADVISORY Include packages needed to fix the given advisory
[root@linuxidc Python-2.7.6]#