nginxphpfpm配置

❶ nginx配置支持php

nginx本身不支持php解析，需要配合php-fpm來配置。

location~.php${
root/var/www;#指定php的根目錄
fastcgi_pass127.0.0.1:9000;#php-fpm的默認埠是9000
fastcgi_indexindex.php;
fastcgi_paramSCRIPT_FILENAME$document_root$fastcgi_script_name;
includefastcgi_params;
}

centos下安裝php-fpm （php及其它組件已經安裝過的情況）

yuminstallphp-fpm

啟動php-fpm 並設置開機啟動 (centos 7)

systemctlstartphp-fpm
systemctlenablephp-fpm

❷ mac配置php-fpm，nginx運行多版本php

1、brew 安裝 php5.6 php5.7 nginx

2、配置php-conf

3、配置虛擬主機

安裝好brew

用brew 命令安裝，如果速度太慢或訪問不了，自行goole brew 換源

brew search php  查看可用的php版本

brew install [email protected]  安裝php5.6

brew install [email protected] 安裝php5.6

brew install nginx       安裝nginx

1、修改php5.6 php-fpm的埠為9056

    cd usr/local/etc/php/5.6 # 到php5.6的目錄下

    vi    php-fpm.conf # 修改文件

        listen = 127.0.0.1:9056  # 修改此埠

        daemonize = yes # 修改為允許後台啟動php-fpm

2、修改php5.6 php-fpm的埠為9070

    cd /usr/local/etc/php/7.1/php-fpm.d # 到php7.1的目錄下

    vi www.conf # 修改埠

        listen = 127.0.0.1:9056  # 修改此埠    

    vi    php-fpm.conf  # 修改文件

         daemonize = yes # 修改為允許後台啟動php-fpm

3、啟動php-fpm

    cd /usr/local/sbin # 到此目錄，建立兩個軟鏈接指向不同版本的php

切換到root用戶

./php-fpm56 

./php-fpm71

啟動後可看到php-fpm的進程，則成功

ps-ef | grep php-fpm

cd /usr/local/etc/nginx/  # 到nginx的目錄下

復制默認的配置文件到server下（此目錄用來存虛擬主機文件）

這里我在server創建了這兩個

vi local.phpinfo56.com.conf # 修改本地域名和nginx代理到php-fpm埠，按照這種方法修改另一個

nginx # 啟動nginx

nginx -s reload # 修改配置文件，重新載入nginx

vi /etc /hosts  # 修改host 加上映射關系

cd  /usr /local/var/www # 在此目錄下建立一個index.php

echo "<?php phpinfo();" > index.php

在瀏覽器訪問可看到

❸ 雲伺服器如何配置nginx支持php

[root@redhat7 ~]# wget http://am1.php.net/get/php-7.1.2.tar.gz/from/this/mirror
[root@redhat7 ~]# tar xzvf php-7.1.2.tar.gz
[root@redhat7 ~]# cd php-7.1.2/
[root@redhat7 ~]# ./configure --prefix=/usr/local/php --enable-fpm
[root@redhat7 php-7.1.2]# make&&make install
查看是否成功編譯安裝PHP
[root@redhat7 php-7.1.2]# php -v
PHP 7.1.2 (fpm-fcgi) (built: Apr 14 2017 20:21:53)
Copyright (c) 1997-2017 The PHP Group
Zend Engine v3.1.0, Copyright (c) 1998-2017 Zend Technologies

編譯安裝完成後PHP不具備配置文件php.ini，此時只需復制php.ini-proction到 /usr/local/lib/php.ini即可,php.ini文件一般在/usr/local/lib/和/etc目錄下

[root@localhost php-7.1.2]# cp php.ini-proction /usr/local/lib/php.ini
[root@redhat7 php]# /usr/local/php/sbin/php-fpm
[14-Apr-2017 20:59:49] ERROR: failed to open configuration file '/usr/local/php/etc/php-fpm.conf': No such file or directory (2)
[14-Apr-2017 20:59:49] ERROR: failed to load configuration file '/usr/local/php/etc/php-fpm.conf'
[14-Apr-2017 20:59:49] ERROR: FPM initialization failed
啟動php-fpm發現缺乏配置文件/usr/local/php/etc/php-fpm.conf
此時只需復制php-fpm的配置文件在安裝php時提供的配置文件的模版/usr/local/php/etc/php-fpm.conf.default到相應/usr/local/php/etc/php-fpm.conf即可

[root@redhat7 etc]# /usr/local/php/sbin/php-fpm
[14-Apr-2017 21:14:32] WARNING: Nothing matches the include pattern '/usr/local/php/etc/php-fpm.d/﹡.conf' from /usr/local/php/etc/php-fpm.conf at line 125.
[14-Apr-2017 21:14:32] ERROR: No pool defined. at least one pool section must be specified in config file
[14-Apr-2017 21:14:32] ERROR: failed to post process the configuration
[14-Apr-2017 21:14:32] ERROR: FPM initialization failed

[root@redhat7 etc]# cp php-fpm.conf.default /usr/local/php/etc/php-fpm.conf

[root@redhat7 etc]# cp /usr/local/php/etc/php-fpm.d/www.conf.default /usr/local/php/etc/php-fpm.d/www.conf
[root@redhat7 etc]# /etc/init.d/php-fpm
[14-Apr-2017 21:23:02] ERROR: unable to bind listening socket for address '127.0.0.1:9000': Address already in use (98)
[14-Apr-2017 21:23:02] ERROR: FPM initialization failed
[root@redhat7 etc]# netstat -nldp|grep 9000
tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 3721/php-fpm: maste
[root@redhat7 php-7.1.2]# cp sapi/fpm/init.d.php-fpm /etc/init.d/php-fpm
[root@redhat7 php-7.1.2]# chmod a+x /etc/init.d/php-fpm
[root@redhat7 php-7.1.2]# ll /etc/init.d/php-fpm
-rwxr-xr-x 1 root root 2401 4月 14 21:26 /etc/init.d/php-fpm
[root@redhat7 php-7.1.2]# /etc/init.d/php-fpm start
Starting php-fpm [14-Apr-2017 21:28:09] ERROR: unable to bind listening socket for address '127.0.0.1:9000': Address already in use (98)
[14-Apr-2017 21:28:09] ERROR: FPM initialization failed
failed
[root@redhat7 php-7.1.2]# netstat -nldp |grep 9000
tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 3721/php-fpm: maste
[root@redhat7 php-7.1.2]# kill 3721
[root@redhat7 php-7.1.2]# netstat -nldp |grep 9000
[root@redhat7 php-7.1.2]# /etc/init.d/php-fpm start
Starting php-fpm done
[root@redhat7 php-7.1.2]# service php-fpm status
php-fpm (pid 3927) is running...
[root@redhat7 php-7.1.2]# chkconfig --add php-fpm
[root@redhat7 php-7.1.2]# chkconfig php-fpm --level 345 on

配置nginx支持PHP
修改nginx的配置文件，支持php文件的解析，找到location的添加位置，在後面添加下面這個location
location ~ .php$ {
root /usr/share/nginx/html; #指定php的根目錄
fastcgi_pass 127.0.0.1:9000;#php-fpm的默認埠是9000
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
include fastcgi_params;
}

❹ 求教docker下部署nginx和php-fpm，但fpm無法被解析

配置如下：
location ~* \.php$ {
fastcgi_index index.php;
fastcgi_pass 172.17.0.178:9000;
include fastcgi_params;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
fastcgi_param SCRIPT_NAME $fastcgi_script_name;
}