① 怎樣用單片機做一個多功能萬年歷，用12864屏，不能用時鍾晶元，萬年歷有鬧鍾，計算機秒錶等功能,
#include<reg52.h>
#define uchar unsigned char
#define uint unsigned int
sbit la=P2^6;
sbit wela=P2^7;
sbit rs=P3^5;
sbit lcden=P3^4;
sbit s1=P3^0;
sbit s2=P3^1;
sbit s3=P3^2;
sbit rd=P3^7;
uchar count,s1num;
char miao,shi,fen;
uchar code table[]=" 2007-7-30 MON";
uchar code table1[]=" 00:00:00";
void delay(uint z)
{
uint x,y;
for(x=z;x>0;x--)
for(y=110;y>0;y--);
}
void write_com(uchar com)
{
rs=0;
lcden=0;
P0=com;
delay(5);
lcden=1;
delay(5);
lcden=0;
}
void write_date(uchar date)
{
rs=1;
lcden=0;
P0=date;
delay(5);
lcden=1;
delay(5);
lcden=0;
}
void init()
{
uchar num;
la=0;
wela=0;
lcden=0;
// fen=59;
// miao=53;
// shi=23;
write_com(0x38);
write_com(0x0c);
write_com(0x06);
write_com(0x01);
write_com(0x80);
for(num=0;num<15;num++)
{
write_date(table[num]);
delay(5);
}
write_com(0x80+0x40);
for(num=0;num<12;num++)
{
write_date(table1[num]);
delay(5);
}
TMOD=0x01;
TH0=(65536-50000)/256;
TL0=(65536-50000)%256;
EA=1;
ET0=1;
TR0=1;
}
void write_sfm(uchar add,uchar date)
{
uchar shi,ge;
shi=date/10;
ge=date%10;
write_com(0x80+0x40+add);
write_date(0x30+shi);
write_date(0x30+ge);
}
void keyscan()
{
rd=0;
if(s1==0)
{
delay(5);
if(s1==0)
{ s1num++;
while(!s1);
if(s1num==1)
{
TR0=0;
write_com(0x80+0x40+10);
write_com(0x0f);
}
}
if(s1num==2)
{
write_com(0x80+0x40+7);
}
if(s1num==3)
{
write_com(0x80+0x40+4);
}
if(s1num==4)
{
s1num=0;
write_com(0x0c);
TR0=1;
}
}
if(s1num!=0)
{
if(s2==0)
{
delay(5);
if(s2==0)
{
while(!s2);
if(s1num==1)
{
miao++;
if(miao==60)
miao=0;
write_sfm(10,miao);
write_com(0x80+0x40+10);
}
if(s1num==2)
{
fen++;
if(fen==60)
fen=0;
write_sfm(7,fen);
write_com(0x80+0x40+7);
}
if(s1num==3)
{
shi++;
if(shi==24)
shi=0;
write_sfm(4,shi);
write_com(0x80+0x40+4);
}
}
}
if(s3==0)
{
delay(5);
if(s3==0)
{
while(!s3);
if(s1num==1)
{
/* if(miao==0)
{
miao=59;
write_sfm(10,miao);
write_com(0x80+0x40+10);
}*/
miao--;
if(miao==-1)
miao=59;
write_sfm(10,miao);
write_com(0x80+0x40+10);
}
if(s1num==2)
{
fen--;
if(fen==-1)
fen=59;
write_sfm(7,fen);
write_com(0x80+0x40+7);
}
if(s1num==3)
{
shi--;
if(shi==-1)
shi=23;
write_sfm(4,shi);
write_com(0x80+0x40+4);
}
}
}
}
}
void main()
{
init();
while(1)
{
keyscan();
}
// while(1);
}
void timer0() interrupt 1
{
TH0=(65536-50000)/256;
TL0=(65536-50000)%256;
count++;
if(count==18)
{
count=0;
miao++;
if(miao==60)
{
miao=0;
fen++;
if(fen==60)
{
fen=0;
shi++;
if(shi==24)
{
shi=0;
}
write_sfm(4,shi);
}
write_sfm(7,fen);
}
write_sfm(10,miao);
}
} 自己在網上找個圖看哈就差不多了希望採納
② 利用單片機編程實現萬年歷 求助~！！！！
很簡單。
你的難點根本不用考慮了，如果你用時鍾晶元，比如DS12887，裡面可以自動計算閏年，內置的鬧鍾指令。
你的要求很容易達到，使用52系列單片機，加上一個並行時鍾晶元DS12887然後接一個點陣液晶。
程序的話很多，就不好寫出了，涉及到時鍾的讀出，然後講讀出的值傳到LCD中。
前幾天做了個簡單的電子鍾。
③ 求助高手，關於51單片機12864萬年歷顯示的
你好！你要求萬年歷都實現什麼功能？帶有陽歷顯示嗎？
④ 跪求 51單片機+12864液晶+1302時鍾製成的萬年歷c程序
頂層文件 萬年歷.C
#include<reg51.h>
#include "LCD1602.h"
#include "DS1302.h"
#define uchar unsigned char
#define uint unsigned int
sbit speaker=P2^4;
bit key_flag1=0,key_flag2=0;
SYSTEMTIME adjusted;
uchar sec_add=0,min_add=0,hou_add=0,day_add=0,mon_add=0,yea_add=0;
uchar data_alarm[7]={0};
/************鍵盤控制******************************/
int key_scan() //掃描是否有鍵按下
{ int i=0;
uint temp;
P1=0xf0;
temp=P1;
if(temp!=0xf0)
i=1;
else
i=0;
return i;
}
uchar key_value() //確定按鍵的值
{
uint m=0,n=0,temp;
uchar value;
uchar v[4][3]={'2','1','0','5','4','3','8','7','6','b','a','9'} ;
P1=0xfe; temp=P1; if(temp!=0xfe)m=0;
P1=0xfd;temp=P1 ;if(temp!=0xfd)m=1;
P1=0xfb;temp=P1 ;if(temp!=0xfb)m=2;
P1=0xf7;temp=P1 ;if(temp!=0xf7)m=3;
P1=0xef;temp=P1 ;if(temp!=0xef)n=0;
P1=0xdf;temp=P1 ;if(temp!=0xdf)n=1;
P1=0xbf;temp=P1 ;if(temp!=0xbf)n=2;
value=v[m][n];
return value;
}
/***************************設置鬧鈴函數*******************************/
void naoling(void)
{
uchar i=0,l=0,j;
init1602();
while(key_flag2&&i<12)
if(key_scan()){j=key_value();write_data(j);if(i%2==0)data_alarm[l]=(j-'0')*10;else {data_alarm[l]+=(j-'0');l++;}i++;delay(600);}
write_com(0x01);
}
uchar according(void)
{ uchar k;
if(data_alarm[0]==adjusted.Year&&data_alarm[1]==adjusted.Month&&data_alarm[2]==adjusted.Day&&data_alarm[3]==adjusted.Hour&&data_alarm[4]==adjusted.Minute&&data_alarm[5]==adjusted.Second)
k=1;
else k=0;
return k;
}
void speak(void)
{uint i=50;
while(i)
{speaker=0;
delay(1);
speaker=1;
delay(1);
i--;
}
}
void alarm(void)
{uint i=10;
while(i)
{
speak();
delay(10);
i--;
}
}
/**************************修改時間操作********************************/
void reset(void)
{
sec_add=0;
min_add=0;
hou_add=0;
day_add=0;
mon_add=0;
yea_add=0 ;
}
void adjust(void)
{
if(key_scan()&&key_flag1)
switch(key_value())
{case '0':sec_add++;break;
case '1':min_add++;break;
case '2':hou_add++;break;
case '3':day_add++;break;
case '4':mon_add++;break;
case '5':yea_add++;break;
case 'b':reset();break;
default: break;
}
adjusted.Second+=sec_add;
adjusted.Minute+=min_add;
adjusted.Hour+=hou_add;
adjusted.Day+=day_add;
adjusted.Month+=mon_add;
adjusted.Year+=yea_add;
if(adjusted.Second>59) adjusted.Second=adjusted.Second%60;
if(adjusted.Minute>59) adjusted.Minute=adjusted.Minute%60;
if(adjusted.Hour>23) adjusted.Hour=adjusted.Hour%24;
if(adjusted.Day>31) adjusted.Day=adjusted.Day%31;
if(adjusted.Month>12) adjusted.Month=adjusted.Month%12;
if(adjusted.Year>100) adjusted.Year=adjusted.Year%100;
}
/**************************中斷處理函數*********************************/
void changing(void) interrupt 0 using 0 //需要修改時間和日期，或者停止修改
{
if(key_flag1)key_flag1=0;
else key_flag1=1;
}
void alarming(void) interrupt 3 using 0 //需要設置鬧鈴或者停止設置
{
if(key_flag2)key_flag2=0;
else key_flag2=1;
}
/********************************主函數***********************************/
main()
{uint i;
uchar *l;
uchar p1[]="D:",p2[]="T:";
SYSTEMTIME T;
EA=1;
EX0=1;
IT0=1;
EA=1;
EX1=1;
IT1=1;
init1602();
Initial_DS1302() ;
while(1)
{ write_com(0x80);
write_string(p1,2);
write_com(0xc0);
write_string(p2,2);
DS1302_GetTime(&T) ;
adjusted.Second=T.Second;
adjusted.Minute=T.Minute;
adjusted.Hour=T.Hour;
adjusted.Week=T.Week;
adjusted.Day=T.Day;
adjusted.Month=T.Month;
adjusted.Year=T.Year;
for(i=0;i<9;i++)
{
adjusted.DateString[i]=T.DateString[i];
adjusted.TimeString[i]=T.TimeString[i];
}
adjust();
if(key_flag2)naoling();
if(according())alarm();
DateToStr(&adjusted);
TimeToStr(&adjusted);
write_com(0x82);
write_string(adjusted.DateString,8);
write_com(0xc2);
write_string(adjusted.TimeString,8);
delay(10);
}
（二）頭文件1 顯示模塊 LCD1602.H
#ifndef LCD_CHAR_1602_2009_5_9
#define LCD_CHAR_1602_2009_5_9
#define uchar unsigned char
#define uint unsigned int
sbit lcdrs = P2^0;
sbit lcdrw = P2^1;
sbit lcden = P2^2;
void delay(uint z) // 延時
{
uint x,y;
for(x=z;x>0;x--)
for(y=110;y>0;y--);
}
void write_com(uchar com) // 寫入指令數據到 lcd
{
lcdrw=0;
lcdrs=0;
P0=com;
delay(5);
lcden=1;
delay(5);
lcden=0;
}
void write_data(uchar date) // 寫入字元顯示數據到 lcd
{
lcdrw=0;
lcdrs=1;
P0=date;
delay(5);
lcden=1;
delay(5);
lcden=0;
}
void init1602() // 初始化設定
{
lcdrw=0;
lcden=0;
write_com(0x3C);
write_com(0x0c);
write_com(0x06);
write_com(0x01);
write_com(0x80);
}
void write_string(uchar *pp,uint n)
{
int i;
for(i=0;i<n;i++)
write_data(pp[i]);
}
#endif
(三)頭文件2 時鍾模塊 DS1302.H
#ifndef _REAL_TIMER_DS1302_2009_5_20_
#define _REAL_TIMER_DS1302_2003_5_20_
sbit DS1302_CLK = P2^6; //實時時鍾時鍾線引腳
sbit DS1302_IO = P2^7; //實時時鍾數據線引腳
sbit DS1302_RST = P2^5; //實時時鍾復位線引腳
sbit ACC0 = ACC^0;
sbit ACC7 = ACC^7;
typedef struct SYSTEM_TIME
{
unsigned char Second;
unsigned char Minute;
unsigned char Hour;
unsigned char Week;
unsigned char Day;
unsigned char Month;
unsigned char Year;
unsigned char DateString[9]; //用這兩個字元串來放置讀取的時間
unsigned char TimeString[9];
}SYSTEMTIME; //定義的時間類型
#define AM(X) X
#define PM(X) (X+12) // 轉成24小時制
#define DS1302_SECOND 0x80
#define DS1302_MINUTE 0x82
#define DS1302_HOUR 0x84
#define DS1302_WEEK 0x8A
#define DS1302_DAY 0x86
#define DS1302_MONTH 0x88
#define DS1302_YEAR 0x8C
#define DS1302_RAM(X) (0xC0+(X)*2) //用於計算 DS1302_RAM 地址的宏
/******內部指令**********/
void DS1302InputByte(unsigned char d) //實時時鍾寫入一位元組(內部函數)
{
unsigned char i;
ACC = d;
for(i=8; i>0; i--)
{
DS1302_IO = ACC0;
DS1302_CLK = 1;
DS1302_CLK = 0;
ACC = ACC >> 1; //因為在前面已經定義了ACC0 = ACC^0;以便再次利用DS1302_IO = ACC0;
}
}
unsigned char DS1302OutputByte(void) //實時時鍾讀取一位元組(內部函數)
{
unsigned char i;
for(i=8; i>0; i--)
{
ACC = ACC >>1;
ACC7 = DS1302_IO;
DS1302_CLK = 1;
DS1302_CLK = 0;
}
return(ACC);
}
/********************************/
void Write1302(unsigned char ucAddr, unsigned char ucDa) //ucAddr: DS1302地址, ucData: 要寫的數據
{
DS1302_RST = 0;
DS1302_CLK = 0;
DS1302_RST = 1;
DS1302InputByte(ucAddr); // 地址，命令
DS1302InputByte(ucDa); // 寫1Byte數據
DS1302_CLK = 1;
DS1302_RST = 0;
}
unsigned char Read1302(unsigned char ucAddr) //讀取DS1302某地址的數據
{
unsigned char ucData;
DS1302_RST = 0;
DS1302_CLK = 0;
DS1302_RST = 1;
DS1302InputByte(ucAddr|0x01); // 地址，命令
ucData = DS1302OutputByte(); // 讀1Byte數據
DS1302_CLK = 1;
DS1302_RST = 0;
return(ucData);
}
void DS1302_SetProtect(bit flag) //是否防寫
{
if(flag)
Write1302(0x8E,0x10);
else
Write1302(0x8E,0x00);
}
void DS1302_SetTime(unsigned char Address, unsigned char Value) // 設置時間函數
{
DS1302_SetProtect(0);
Write1302(Address, ((Value/10)<<4 | (Value%10))); //將十進制數轉換為BCD碼
} //在DS1302中的與日歷、時鍾相關的寄存器存放的數據必須為BCD碼形式
void DS1302_GetTime(SYSTEMTIME *Time)
{
unsigned char ReadValue;
ReadValue = Read1302(DS1302_SECOND);
Time->Second = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F); //將BCD碼轉換為十進制數
ReadValue = Read1302(DS1302_MINUTE);
Time->Minute = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
ReadValue = Read1302(DS1302_HOUR);
Time->Hour = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
ReadValue = Read1302(DS1302_DAY);
Time->Day = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
ReadValue = Read1302(DS1302_WEEK);
Time->Week = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
ReadValue = Read1302(DS1302_MONTH);
Time->Month = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
ReadValue = Read1302(DS1302_YEAR);
Time->Year = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
}
unsigned char *DataToBCD(SYSTEMTIME *Time)
{
unsigned char D[8];
D[0]=Time->Second/10<<4+Time->Second%10;
D[1]=Time->Minute/10<<4+Time->Minute%10;
D[2]=Time->Hour/10<<4+Time->Hour%10;
D[3]=Time->Day/10<<4+Time->Day%10;
D[4]=Time->Month/10<<4+Time->Month%10;
D[5]=Time->Week/10<<4+Time->Week%10;
D[6]=Time->Year/10<<4+Time->Year%10;
return D;
}
void DateToStr(SYSTEMTIME *Time)
{
//將十進制數轉換為液晶顯示的ASCII值
Time->DateString[0] = Time->Year/10 + '0';
Time->DateString[1] = Time->Year%10 + '0';
Time->DateString[2] = '-';
Time->DateString[3] = Time->Month/10 + '0';
Time->DateString[4] = Time->Month%10 + '0';
Time->DateString[5] = '-';
Time->DateString[6] = Time->Day/10 + '0';
Time->DateString[7] = Time->Day%10 + '0';
Time->DateString[8] = '\0';
}
void TimeToStr(SYSTEMTIME *Time)
{
//將十進制數轉換為液晶顯示的ASCII值
Time->TimeString[0] = Time->Hour/10 + '0';
Time->TimeString[1] = Time->Hour%10 + '0';
Time->TimeString[2] = ':';
Time->TimeString[3] = Time->Minute/10 + '0';
Time->TimeString[4] = Time->Minute%10 + '0';
Time->TimeString[5] = ':';
Time->TimeString[6] = Time->Second/10 + '0';
Time->TimeString[7] = Time->Second%10 + '0';
Time->DateString[8] = '\0';
}
void Initial_DS1302(void)
{
unsigned char Second;
Second=Read1302(DS1302_SECOND);
if(Second&0x80) //初始化時間
DS1302_SetTime(DS1302_SECOND,0);
}
void DS1302_TimeStop(bit flag) // 是否將時鍾停止
{
unsigned char Data;
Data=Read1302(DS1302_SECOND);
DS1302_SetProtect(0);
if(flag)
Write1302(DS1302_SECOND, Data|0x80);
else
Write1302(DS1302_SECOND, Data&0x7F);
}
#endif
⑤ 誰能告訴我單片機製作電子萬年歷的目的和意義
一、熟悉數碼管的驅動
二、熟悉按鍵的應用
......把做萬年歷所需要的器件列出來，大致就是這個格式