1. 單片機英文文獻及翻譯，2200字左右
Single-Chip Microcomputer
有的時候，也可以用SingleChip來代替
下面鏈接的第六章有講單片機Single Chip Microcmputer 第148頁開始
http://books.google.co.nz/books?id=AUtTx3TgO7IC&pg=PT41&lpg=PT41&dq=what+is+Single+Chip+Microcomputer&source=web&ots=QQqVentmyy&sig=ZPBVtVXwiQakAtCIXJqzRw_BobE&hl=en&sa=X&oi=book_result&resnum=8&ct=result#PPT41,M1
這是一段中漢對照的。
中文:
單片機是把主要計算機功能部件都集成在一塊晶元上的微型計算機。它是一種集計數和多中介面於一體的微控制器，被廣泛應用在智能產品和工業自動化上，而51單片機是個單片機中最為典型和最有代表性的一種。
本課題選擇89S51為核心控制元件，設計了一個日常生活中用到的電子音樂門鈴系統。當功能按鍵按下，音樂響起，發光二極體隨著音樂的節拍進行閃爍，LED顯示相應的定時器初值。音樂演奏過程中再次按下按鍵無效，只有當音樂段結束再次按下才有效。如果是電子音樂門鈴在響，按下復位按鍵就終止，顯示初始狀態。經過實踐證明，本系統運行穩定，具有一定的實用價值。
-------------
翻譯:
SCM is a major piece of computer components are integrated into the chip micro-computer. It is a multi-interface and counting on the micro-controller integration, and intelligence procts are widely used in instrial automation. and MCS-51 microcontroller is a typical and representative.
The topics chosen for the 89S51 control of the core components used in the design of a daily electronic music doorbell system. When the function button is pressed, the music sounded and the music beats with light emitting diodes for flickered. Initial corresponding LED timer. Musical process again pressed the button ineffective, and only when pressed again before the end of the music effectively. If the doorbell ring for electronic music, press the button on the rection and termination, showed initial state. Practice has proved that the system is stable and has some practical value.
本設計是以凌陽16位單片機為重心，介紹語音控制在機械手中的應用，實現微型舵機的運作，完成所指定的動作。其中通過凌陽16位單片機輸出的脈沖信號來准確的控制機械手的擺動角度，機械手的捏拿動作由電磁鐵完成，電磁鐵的通斷由凌陽16位單片機的I/O口控制，硬體和軟體都在具體的實驗中證明了其可行性
This design is take insults the positive 16 monolithic integrated circuits as a center of gravity, introced the pronunciation control in manipulator's application, the realization miniature servo operation, completes the movement which assigns. Through insults the pulse signal which the positive 16 monolithic integrated circuits outputs to come the accurate control manipulator to swing the angle, the manipulator pinches takes the movement to complete by the electro-magnet, the electro-magnet passes the legal reason for judgment to insult the positive 16 monolithic integrated circuits I/O control, the hardware and the software all have proven its feasibility in the concrete experiment
2. 找些10個51單片機的參考文獻名字，就是設計最後的那個參考文獻。。 外文文獻至少5篇
外文文獻有,但怎麼提供給你呢,至於翻譯沒有,翻譯得靠你自己了,如果需要的話回復留個郵箱地址即可,希望能幫到你,多多給點懸賞分吧,急用的話請多選賞點分吧,這樣更多的知友才會及時幫到你,我從文獻資料中找...
3. 怎麼查找關於畢業設計所需的外文文獻 我本科是學電氣的 課題名稱是《基於單片機的門控系統設計》
去下載期刊吧，cnki國內的敗譽，sci是外國的
都是論文，建議看國外的，國內的很多都是炒來炒去枝枯告的。你們學校應該是有購買的，從你們學校的埠進去查吧，好猛明好珍惜機會啊，出來了，就用不了，買不起啊。
4. 急求一份關於單片機紅外遙控電子密碼鎖相關的參考文獻。來5份左右外文的。多多益善。先謝謝啦。
[1] 於殿泓，王新年．單片機原理與程序設計實驗教程[M]．西安：西安電子科技大學出版社，2007，8．
[2] 趙文博，劉文濤．單片機語言C51程序設計[M]．北京：人民郵電出版社，2005，10．
[3] 李愛秋．紅外線遙控12位電子密碼鎖的設計[J]． 溫州職業技術學院學報第8卷第一期，2008．
[4] 陳傑，黃鴻．感測器與檢測技術[M]．北京:高等教育出版社，2010，8．
[5] 周航慈. 單片機應用程序設計技術[M]. 北京：北京航空航天大學出版社，2011，2．
[6] 李朝青. 單片機原理及介面技術[M]. 北京：北京航空航天大學出版社, 2005，10．
[7] 孫育才. MCS-51系列單片微型計算機及其應用[M]. 東南大學出版社, 2004，6．
[8] 沈紅衛. 單片機應用系統設計實力與分析[M]. 北京:北京航空航天大學出版社，2003.
[9] 徐愛鈞, 彭秀華. 單片機高級語言C51應用程序設計[M].北京航空航天大學出版社，2006．
[10] 曾一江. 單片微機原理與介面技術[M]. 北京：科技出版社,2009，12．
[11] 康華光. 電子技術基礎（模擬部分）[M]. 北京：高等教育出版社, 2004，4．
[12] Nishino S F,Paoli G C,Spain J C. Aerobic degradation of dinitroto-luenes and pathway for bacterial degradation of 2,6-dinitrotoluene Volume 66,2006.
[13] Kennes C,W M Wu,L Bhatnagar et al. Anaerobic dechlorination and mineralization of PCP and 2,4,6-trichlorophenol by the methanogenic PCP-degrading granules Volume 44,2004.
[14] Philips. Proct Specification. COMS single-chip 8-bit microcontroller.
[15] Hermarn K P. Neubert. Instrument Transcers-An Introction to their Performance and Design.2nd Ed[M]. Clarendon Press, Oxford. 1975.
5. 單片機英文參考文獻
單片機英文參考文獻
[1] 李廣弟等 單片機基礎 北京航空航天出版社， 2001.7
[2] 樓然苗等 51 系列單片機設計實例 北京航空轎宴航天出版社， 2003.3
[3] 唐俊翟等 單片機原理與應用 冶金工業出版社， 2003.9
[4] 劉瑞新等 單片機原理及應用教程 機械工業出版社， 2003.7
[5] 吳國經等 單片機應用技術 中國電力出版社， 2004.1
[6] 李全利，遲榮強編著 單片機原理及介面技術 高等教育出版社，2004.1
[7] 侯媛彬等，凌陽單片機原理及其畢業設計精選 2006年，科學出版社
銀羨[8] 羅亞非，凌陽十六位單片機應用基礎2003年 北京航空航天大學出版社
[9] 北京北陽電子有限公司，061A凌陽單片機及其附帶光碟2003年
[10] 張毅剛等， MCS-51單片機應用設計，哈工大出版社，2004年第2版
[11] 霍孟友等，單片機原理與應用，機械工業出版社，2004.1
[12] 霍孟友等，單片機原理與應用學習概要及題解，機械工業出版社，閉搏銀2005.3
[13] 許泳龍等，單片機原理及應用，機械工業出版社，2005.1
[14] 馬忠梅等，單片機的C語言應用程序設計，北京航空航天大學出版社，2003修訂版
[15] 薛均義 張彥斌 虞鶴松 樊波，凌陽十六位單片機原理及應用，2003年，北京航空航天大學出版社 ;
6. 求單片機參考文獻，中文的有相應的外文翻譯
[1]楊十元.模擬系統故障診斷與可靠性設計，清華人學出版社，2004
[2]童詩白.模擬電子技術基礎，高教出版社，2006
[3]周航慈.單片機應用程序設計技術，北京航空航大大學出版社，2005
[4]李剛.ADuC812系列單片機原理和應用技術，北京航空航天山版社，2005
[5]胡誕康.在線測試技術的發展與展望，計量與測試技術，2001
[6]星河科技開發公司，印刷電路板在線測試系統的發展與應用，電子標准化與測量，2003
[7]季華.PCB測試技術的綜合利用，電子產品世界，2007-12
[8]鮮壇.組裝測試技術應用前景分析，世界電子元器件，2008-1
[9]張金敏.基於單片機控制的智能電阻電容在線測試儀，甘肅科技，2006
[10]庄紹雄王濟浩張迎春.智能阻容在線測試技術，山東工業大學學報，
[11]陳國順陳春沙王格芳等.通用電路板在線測試儀設計與開發，儀器儀表學報，2001
[12]Nancy Hplland.Automated Instruments Smooth Rapid Test System Development.Test & Measurement World,AUGUST 2001
[13]盧育強.如何設定ICT的上下限，電子生產設備，2003 142-143
[14]趙悅 沈青松 終玉軍.路板的測試技術，遼寧工學院學報，2008-1
[15]程亞黎 曾周末.電路故障自動測試與診斷系統，中國儀器儀表，2007
7. 關於單片機的參考文獻要具體頁碼， 要求至少出現2篇英文,期刊需要頁碼，有的發我郵箱，[email protected]
[1] 張毅剛.《新編MCS51單片機應用設計（第三版）》，哈爾濱：哈爾濱工業大學出版社，2008
[2] 何立民.《單片機應用技術選編》，北京：北京航空大學出版社，1998
[3] 李華.《MCS-51系列單片機使用介面技術》，北京：北京航空航天大學出版社，1993
[4] 彭為.《單片機典型系統設計實例精講》，北京：電子工業出版社，2006
[5] 潘永雄.《新編單片機原理與應用》，西安：西安電子科技大學出版社，2003
[6] 童詩白,華成英，《模擬電子技術基礎》，北京：高等教育出版社，2000
[7] 閻石主.《數字電子技術基礎》，北京：高等教育出版社，1998
[8] 樊昌信,曹麗娜.《通信原理》，北京：國防工業出版社，2007
[9] 李瀚蓀.《電路分析基礎》，北京：高等教育出版社1991
畢 業 論 文（設 計）開 題 報 告
[10]G.Edward Suh, Charles W．O』Donnell， Srinivas Devadas， Aegis：a single-chip secure processor, IEEE Design and Test of Computers．2008，24（6）570－580．
[11] Mt. Prospect.MCS 51 Family of Microcontrollers Architectural Overview. September 1993
8. 求關於單片機的外文文獻 急急急
1. About SCM It can be said across the twentieth century, the three "electric" era, that is, electrical era, the electronic age, and has now entered the computer age. However, such a computer, usually refers to the personal computer, referred to as PC. It consists of the host, keyboard, monitor etc.. Another type of computer, most people do not know how. This computer is to smart to give a variety of mechanical microcontroller (also known as micro-controller). As the name suggests, this computer system only used the smallest one IC, you can perform simple operations and control. Because of its small size, usually hidden in a charged mechanical "stomach" Lane. It is the entire device, like the human brain plays a role, it goes wrong, the whole device was paralyzed. Now, this MCU has a very wide field of use, such as smart meters, real-time instrial control, communications equipment, navigation systems, home appliances and so on. Once the microcontroller were using a variety of procts, you can serve to upgrade the effectiveness of the proct, often in the proct name is preceded by the adjective - "smart", such as washing machines and so intelligent. At present, some technical personnel of factories or other amateur electronics developers to engage in out of certain procts, not the circuit is too complex, that is, functions are too simple and easy to be copied. The reason may be stuck in the proct without the use of a microcontroller or other programmable logic device. SCM basic component is a central processing unit (CPU in the computing device and controller), read-only memory (usually expressed as a ROM), read-write memory (also known as Random Access Memory MRAM is usually expressed as a RAM) , input / output port (also divided into parallel port and serial port, expressed as I / O port), and so composed. In fact there is also a clock circuit microcontroller, so that ring operation and control of the microcontroller, can rhythmic manner. In addition, there are so-called "break system", the system is a "janitor" role, when the microcontroller control object parameters that need to be intervention to reach a particular state, can after this "janitor" communicated to the CPU, so that CPU priorities of the external events to take appropriate counter-measures. 單片機的簡介可以說，二十世紀跨越了三個「電」的時代，即電氣時代、電子時代和現已進入的電腦時代。不過，這種電腦，通常是指個人計算機，簡稱PC機。它由主機、鍵盤、顯示器等組成。還有一類計算機，大多數人卻不怎麼熟悉。這種計算機就是把智能賦予各種機械的單片機（亦稱微控制器）。顧名思義，這種計算機的最小系統只用了一片集成電路，即可進行簡單運算和控制。因為它體積小，通常都藏在被控機械的「肚子」里。它在整個裝置中，起著有如人類頭腦的作用，它出了毛病，整個裝置就癱瘓了。現在，這種單片機的使用領域已十分廣泛，如智能儀表、實時工控、通訊設備、導航系統、家用電器等。各種產品一旦用上了單片機，就能起到使產品升級換代的功效，常在產品名稱前冠以形容詞——「智能型」，如智能型洗衣機等。現在有些工廠的技術人員或其它業余電子開發者搞出來的某些產品，不是電路太復雜，就是功能太簡單且極易被仿製。究其原因，可能就卡在產品未使用單片機或其它可編程邏輯器件上。單片機的基本組成是由中央處理器（即CPU中的運算器和控制器）、只讀存貯器（通常表示為ROM）、讀寫存貯器（又稱隨機存貯器通常表示為RAM）、輸入/輸出口（又分為並行口和串列口，表示為I/O口）等等組成。實際上單片機裡面還有一個時鍾電路，使單片機在進行運算和控制時，都能有節奏地進行。另外，還有所謂的「中斷系統」，這個系統有「傳達室」的作用，當單片機控制對象的參數到達某個需要加以干預的狀態時，就可經此「傳達室」通報給CPU，使CPU根據外部事態的輕重緩急來採取適當的應付措施。
9. 關於單片機控制步進電機的英文參考文獻
文獻螞舉1:
This project aimed to develop a wireless system to detect and allow only the authorized persons. The system was based on Radio Frequency Identification (RFID) technology and consists of a passive RFID tag. The passive micro transponder tag collects power from the 125 KHz magnetic field generated by the base station, gathers information about the Tag ID and sends this information to the base station. The base station receives, decodes and checks the information available in its Database and Manchester code was used to send those information. The system performed as desired with a 10cm diameter antenna attached to the transponder. The Base Station is built by using the Popular 8051 family Microcontroller. It gets the tag ID and if the tag ID is stored in its memory then the microcontroller will allow the person inside.
RFID Reader Mole, are also called as interrogators. They convert radio waves returned from the RFID tag into a form that can be passed on to Controllers, which can make use of it. RFID tags and readers have to be tuned to the same frequency in order to communicate. RFID systems use many different frequencies, but the most common and widely used Reader frequency is 125 KHz.
全部內高賣容及下載戚物逗地址:
http://www.8051projects.net/downloads137.html
---------------------------------------------------------------
文獻2:
Choose controller according to your requirements of program memory(flash), RAM, ADC, EEPROM. 16kB of flash is sufficient to implement floodfill algorithm. If you are thinking of implementing floodfill algorithm then 256 bytes are required to store Map of the maze and 512 bytes are required for processing so you need atleast 1kBRAM to implement floodfill. ATmega16,32 and PIC18f452 are some controllerspopularly used in micromouse. If you are thinking of building just a wall follower then simple 8051 based controller likeAT89s52 can also be used. Stepper driving:Please read http://www.triindia.co.in/resources/?p=40 a step by step stepper motor guidefirst. There are two types of motors a) unipolar b) bipolar. Unipolar stepper motors can be used as bipolar steppers so prefer unipolar whilepurchasing stepper. You can use simple ULN2803 IC the circuit can be found in 8051 microcontroller by Mazidi. ULN2803 has eight darlington pair in a single package. It hascurrent carrying capacity of 500mA. so it will get heated up frequently will get damaged.So two ULN2803 can be connected in parallel to fix the problem but this is a chalta haiway of driving stepper.
全部見:
http://66.102.9.104/search?q=cache:8fC6eNhdpGEJ:graigroup.files.wordpress.com/2008/04/micromouse1.pdf+stepper+motor+AT89S52&hl=en&ct=clnk&cd=21&gl=uk
---------------------------------------------------------------文獻3:
Stepper Motor Advantages
and Disadvantages
Advantages
1. The rotation angle of the motor is
proportional to the input pulse.
2. The motor has full torque at stand-
still (if the windings are energized)
3. Precise positioning and repeat-
ability of movement since good
stepper motors have an accuracy of
3 – 5% of a step and this error is
non cumulative from one step to
the next.
4. Excellent response to starting/
stopping/reversing.
5. Very reliable since there are no con-
tact brushes in the motor.
Therefore the life of the motor is
simply dependant on the life of the
bearing.
6. The motors response to digital
input pulses provides open-loop
control, making the motor simpler
and less costly to control.
7. It is possible to achieve very low
speed synchronous rotation with a
load that is directly coupled to the
shaft.
8. A wide range of rotational speeds
can be realized as the speed is
proportional to the frequency
全文見:
http://72.14.235.104/search?q=cache:v1op7zKvYDEJ:library.solarbotics.net/pdflib/pdf/motorbas.pdf+stepper+motor&hl=en&ct=clnk&cd=9&gl=uk
10. 求關於單片機或LCD的外文文獻 要書名，作者， 出版社，第幾版，時間.
[1]Bo Ran Han,Zheng Liu,You Zhou,Kai Zhou. Queue System Based on GSM Modem and Single Chip Microcomputer』s Communication[J]. Advanced Materials Research,2012,1566(433).
[2]Bing Liu,Tao Wu. Design and Application of Single Chip Microcomputer in SCR Light Regulation Circuit[J]. Applied Mechanics and Materials,2013,2754(431).
[3]Min Cao. A Study of Visual Wireless Control System Based on MCU in Power Plants[J]. Applied Mechanics and Materials,2014,2808(448).
[4]Jun Jie Lin,Chun Yang Wang,Da Sen Wang. Arbitrary Integer Frequency Divider Based on Single Chip Microcomputer[J]. Applied Mechanics and Materials,2014,2789(441).
[5]Hong Li,Si Qing Zhang. Design for Robot Control Board Based on AVR Single Chip Microcomputer[J]. Applied Mechanics and Materials,2014,2935(484).
[6]Qi Guo Yao,Yu Liang Liu. Reliability Design of Ship Main Engine Remote Control System Based on Single Chip Microcomputer[J]. Applied Mechanics and Materials,2014,3207(556).
[7]Jian Pu Bia,Mei Xia Gao. Design of Ultrasonic Rangefinder Controlled by Single Chip Microcomputer[J]. Applied Mechanics and Materials,2014,3360(599).
[8]Dan Tong Zhang. Research on University Classroom Lighting Energy Saving Intelligence Control System Based on Single Chip Microcomputer[J]. Advanced Materials Research,2014,3470(1030).
[9]Qing Zhuang. Weighing System Design Based on Single Chip Microcomputer[J]. Advanced Materials Research,2015,3701(1070).
[10]Yishan Zeng,Jun Qian. Designs of a fire detecting and fire pre-warning system based on single chip microcomputer[J]. Procedia Engineering,2010,7.
中國知網，網路學術，谷歌學術
上面都可查找