centos65升级php56

㈠ centos6.5怎么安装php5.5

1.******已安装Nginx******
ps -aux | grep nginx
netstat -anptu | grep 80

2.清除系统中php痕迹：
yum remove php
rm -rvf /etc/php
rm -rvf /etc/php.ini
rm -f /usr/bin/php

3.安装php所需软件包：
tar zxvf autoconf-2.68.tar.gz -C /usr/src
cd /usr/src/autoconf-2.68/
./configure && make && make install
tar zxvf libiconv-1.14.tar.gz -C /usr/src
cd /usr/src/libiconv-1.14/
./configure && make && make install
tar zxvf libmcrypt-2.5.8.tar.gz -C /usr/src
cd /usr/src/libmcrypt-2.5.8/
./configure && make && make install
ldconfig
cd libltdl/
./configure --enable-ltdl-install
make && make install
export LD_LIBRARY_PATH=/usr/local/lib:$LD_LIBRARY_PATH
tar zxvf mhash-0.9.9.9.tar.gz -C /usr/src
cd /usr/src/mhash-0.9.9.9/
./configure && make && make install
tar zxvf mcrypt-2.6.8.tar.gz -C /usr/src
cd /usr/src/mcrypt-2.6.8/
./configure && make && make install

4.加载php动态模块：
ln -s /usr/local/lib/libmcrypt.la /usr/lib64/libmcrypt.la
ln -s /usr/local/lib/libmcrypt.so /usr/lib64/libmcrypt.so
ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib64/libmcrypt.so.4
ln -s /usr/local/lib/libmcrypt.so.4.4.8
/usr/lib64/libmcrypt.so.4.4.8
ln -s /usr/local/lib/libmhash.a /usr/lib64/libmhash.a
ln -s /usr/local/lib/libmhash.la /usr/lib64/libmhash.la
ln -s /usr/local/lib/libmhash.so /usr/lib64/libmhash.so
ln -s /usr/local/lib/libmhash.so.2 /usr/lib64/libmhash.so.2
ln -s /usr/local/lib/libmhash.so.2.0.1
/usr/lib64/libmhash.so.2.0.1
cp -R /usr/lib64/libpng.* /usr/lib/
cp -R /usr/lib64/libjpeg.* /usr/lib/
echo "/lib" >> /etc/ld.so.conf
echo "/usr/lib" >> /etc/ld.so.conf
echo "/usr/lib64" >> /etc/ld.so.conf
echo "/usr/local/lib" >> /etc/ld.so.conf
echo "* soft nproc 65535" >> /etc/security/limits.conf
echo "* hard nproc 65535" >> /etc/security/limits.conf
echo "* soft nofile 65535" >> /etc/security/limits.conf
echo "* hard nofile 65535" >> /etc/security/limits.conf
echo "fs.file-max=65535" >> /etc/sysctl.conf

ldconfig

5.解压、配置、编译、安装php：
tar zxvf php-5.5.25.tar.gz -C /usr/src
cd /usr/src/php-5.5.25/
./configure --prefix=/usr/local/php \
--with-config-file-path=/usr/local/php/etc \
--enable-fpm \
--with-fpm-user=www \
--with-fpm-group=www \
--with-mysql=mysqlnd \
--with-mysqli=mysqlnd \
--with-pdo-mysql=mysqlnd \
--with-iconv-dir \
--with-freetype-dir \
--with-jpeg-dir \
--with-png-dir \
--with-zlib \
--with-libxml-dir=/usr \
--enable-xml \
--enable-opcache \
--disable-rpath \
--enable-bcmath \
--enable-shmop \
--enable-sysvsem \
--enable-inline-optimization \
--with-curl \
--enable-mbregex \
--enable-mbstring \
--with-mcrypt \
--enable-ftp \
--with-gd \
--enable-gd-native-ttf \
--with-openssl \
--with-mhash \
--enable-pcntl \
--enable-sockets \
--with-xmlrpc \
--enable-zip \
--enable-soap \
--without-pear \
--with-gettext \
--disable-fileinfo
make ZEND_EXTRA_LIBS='-liconv'
make install

6.链接php可执行文件：
ln -s /usr/local/php/bin/php /usr/bin/php
ln -s /usr/local/php/bin/phpize /usr/bin/phpize
ln -s /usr/local/php/sbin/php-fpm /usr/bin/php-fpm

7.编辑php.ini配置文件：
cp /usr/src/php-5.5.25/php.ini-proction
/usr/local/php/etc/php.ini
ln -s /usr/local/php/etc/php.ini /etc/php.ini
vim /etc/php.ini
[PHP]
engine = On
zend.ze1_compatibility_mode = Off
short_open_tag = On
asp_tags = Off
precision
= 12
y2k_compliance = On
output_buffering = On
zlib.output_compression = Off
implicit_flush = Off
unserialize_callback_func=
serialize_precision = 100
safe_mode = Off
safe_mode_gid = Off
safe_mode_include_dir =
safe_mode_exec_dir =
safe_mode_allowed_env_vars = PHP_
safe_mode_protected_env_vars = LD_LIBRARY_PATH
disable_functions =
passthru,exec,system,chroot,scandir,chgrp,chown,shell_exec,proc_open,proc_get_status,ini_alter,ini_restore,dl,openlog,syslog,readlink,symlink,popepassthru,stream_socket_server,fsocket
disable_classes =
expose_php = On
error_reporting = E_ALL & ~E_NOTICE
display_errors = On
display_startup_errors = Off
log_errors = Off
log_errors_max_len = 1024
ignore_repeated_errors = Off
ignore_repeated_source = Off
report_memleaks = On
track_errors = Off
variables_order = "EGPCS"
register_globals = Off
register_long_arrays = Off
register_argc_argv = On
auto_globals_jit = On
post_max_size = 50M
magic_quotes_gpc = Off
magic_quotes_runtime = Off
magic_quotes_sybase = Off
auto_prepend_file =
auto_append_file =
default_mimetype = "text/html"
doc_root =
user_dir =
extension_dir =
"/usr/local/php/lib/php/extensions/no-debug-non-zts-20121212/"
enable_dl = On
cgi.fix_pathinfo=0
file_uploads = On
upload_max_filesize = 50M
max_file_uploads = 20
allow_url_fopen = On
allow_url_include = Off
default_socket_timeout = 60
[Date]
date.timezone = PRC
[filter]
[iconv]
[sqlite]
[Pcre]
[Syslog]
define_syslog_variables = Off
[mail function]
SMTP = localhost
smtp_port = 25
[SQL]
sql.safe_mode = Off
[ODBC]
odbc.allow_persistent = On
odbc.check_persistent = On
odbc.max_persistent = -1
odbc.max_links = -1
odbc.defaultlrl = 4096
odbc.defaultbinmode = 1
[MySQL]
mysql.allow_persistent = On
mysql.max_persistent = -1
mysql.max_links = -1
mysql.default_port =
mysql.default_socket =
mysql.default_host =
mysql.default_user =
mysql.default_password =
mysql.connect_timeout = 60
mysql.trace_mode = Off
[MySQLi]
mysqli.max_links = -1
mysqli.default_port = 3306
mysqli.default_socket =
mysqli.default_host =
mysqli.default_user =
mysqli.default_pw =
mysqli.reconnect = Off
[mSQL]
msql.allow_persistent = On
msql.max_persistent = -1
msql.max_links = -1
[OCI8]
[PostgresSQL]
pgsql.allow_persistent = On
pgsql.auto_reset_persistent = Off
pgsql.max_persistent = -1
pgsql.max_links = -1
pgsql.ignore_notice = 0
pgsql.log_notice = 0
[Sybase]
sybase.allow_persistent = On
sybase.max_persistent = -1
sybase.max_links = -1
sybase.min_error_severity = 10
sybase.min_message_severity = 10
sybase.compatability_mode = Off
[Sybase-CT]
sybct.allow_persistent = On
sybct.max_persistent = -1
sybct.max_links = -1
sybct.min_server_severity = 10
sybct.min_client_severity = 10
[bcmath]
bcmath.scale = 0
[browscap]
[Informix]
ifx.default_host =
ifx.default_user =
ifx.default_password =
ifx.allow_persistent = On
ifx.max_persistent = -1
ifx.max_links = -1
ifx.textasvarchar = 0
ifx.byteasvarchar = 0
ifx.charasvarchar = 0
ifx.blobinfile = 0
ifx.nullformat = 0
[Session]
session.save_handler = files
session.use_cookies = 1
session.name = PHPSESSID
session.auto_start = 0
session.cookie_lifetime = 0
session.cookie_path = /
session.cookie_domain =
session.cookie_httponly =
session.serialize_handler = php
session.gc_probability = 1
session.gc_divisor
= 100
session.gc_maxlifetime = 1440
session.bug_compat_42 = 1
session.bug_compat_warn = 1
session.referer_check =
session.entropy_length = 0
session.entropy_file =
session.cache_limiter = nocache
session.cache_expire = 180
session.use_trans_sid = 0
session.hash_function = 0
session.hash_bits_per_character = 4
url_rewriter.tags =
"a=href,area=href,frame=src,input=src,form=,fieldset="
[MSSQL]
mssql.allow_persistent = On
mssql.max_persistent = -1
mssql.max_links = -1
mssql.min_error_severity = 10
mssql.min_message_severity = 10
mssql.compatability_mode = Off
mssql.secure_connection = Off
[Assertion]
[COM]
[mbstring]
[FrontBase]
[gd]
[exif]
[Tidy]
tidy.clean_output = Off
[soap]
soap.wsdl_cache_enabled=1
soap.wsdl_cache_dir="/tmp"
soap.wsdl_cache_ttl=86400
[Zend Optimizer]
zend_extension =
/usr/local/php/lib/php/extensions/no-debug-non-zts-20121212/opcache.so
zend_loader.enable = 1
zend_loader.disable_licensing = 0
zend_loader.obfuscation_level_support = 3

8.编辑php-fpm.conf配置文件：
cp /usr/local/php/etc/php-fpm.conf.default
/usr/local/php/etc/php-fpm.conf
vim /usr/local/php/etc/php-fpm.conf
[global]
pid = /home/php/pid/php-fpm.pid
error_log = /home/php/log/php-fpm_error.log
log_level = notice
[www]
listen = 127.0.0.1:9000
listen.backlog = -1
listen.allowed_clients = 127.0.0.1
listen.owner = www
listen.group = www
listen.mode = 0666
user = www
group = www
pm = dynamic
pm.max_children = 10
pm.start_servers = 2
pm.min_spare_servers = 1
pm.max_spare_servers = 6
request_terminate_timeout = 100
request_slowlog_timeout = 0
slowlog = /home/php/log/slow.log

9.编写php-fpm启动脚本
vim /etc/init.d/php-fpm
#!/bin/sh
# chkconfig:
2345 90
10
#
Description:
Start and
Stop php-fpm
# Provides:

php-fpm
#
Default-Start:
2 3 4 5
#
Default-Stop:
0 1 6
prefix=/usr/local/php
exec_prefix=${prefix}
php_fpm_BIN=${prefix}/sbin/php-fpm
php_fpm_CONF=${prefix}/etc/php-fpm.conf
php_fpm_PID=/home/php/pid/php-fpm.pid
php_opts="--fpm-config $php_fpm_CONF --pid $php_fpm_PID"
wait_for_pid () {
try=0
while test $try -lt 35 ; do
case "$1" in
'created')
if [ -f "$2" ] ; then
try=''
break
fi
;;
'removed')
if [ ! -f "$2" ] ; then
try=''
break
fi
;;
esac
echo -n .
try=`expr $try + 1`
sleep 1
done
}
case "$1" in
start)
echo -n "Starting php-fpm..."
$php_fpm_BIN --daemonize $php_opts
if [ "$?" != 0 ] ; then
echo " failed"
exit 1
fi
wait_for_pid created $php_fpm_PID
if [ -n "$try" ] ; then
echo " failed"
exit 1
else
echo " done"
fi
;;
stop)
echo -n "Stoping php-fpm..."
if [ ! -r $php_fpm_PID ] ; then
echo "warning, no pid file found - php-fpm is not running ?"
exit 1
fi
kill -QUIT `cat $php_fpm_PID`
wait_for_pid removed $php_fpm_PID
if [ -n "$try" ] ; then
echo " failed. Use force-quit"
exit 1
else
echo " done"
fi
;;
force-quit)
echo -n "Terminating php-fpm "
if [ ! -r $php_fpm_PID ] ; then
echo "warning, no pid file found - php-fpm is not running ?"
exit 1
fi
kill -TERM `cat $php_fpm_PID`
wait_for_pid removed $php_fpm_PID
if [ -n "$try" ] ; then
echo " failed"
exit 1
else
echo " done"
fi
;;
restart)
$0 stop
$0 start
;;
reload)
echo -n "Reload service php-fpm "
if [ ! -r $php_fpm_PID ] ; then
echo "warning, no pid file found - php-fpm is not running ?"
exit 1
fi
kill -USR2 `cat $php_fpm_PID`
echo " done"
;;
*)
echo "Usage: $0 {start|stop|force-quit|restart|reload}"
exit 1
;;
esac

10.创建目录并修改权限，重启nginx服务：
mkdir -p /home/php/log
mkdir -p /home/php/pid
chown -R www:www /home/php/log
chown -R www:www /home/php/pid
service nginx restart

11.添加php-fpm系统服务：
chmod +x /etc/init.d/php-fpm
chkconfig --add php-fpm
chkconfig --level 2345 php-fpm on
chkconfig --list | grep php-fpm

12.启动php-fpm服务：
service php-fpm start
ps -aux | grep php-fpm
netstat -anptu | grep 9000

13.配置php测试页：
vim /home/www/html/phpinfo.php

㈡ 如何在CentOS 6.5上升级PHP版本

Step1：查看安装服务器当前安装版本

• php-V



• 含有则进行下一步


• Step5：查看当前安装包，并将其记录下来，方便后面安装



• yumlistinstalled|grepphp

• Step6：删除原来PHP包



• yumremovephp*

• Step7：安装新的版本



• yuminstallphp55w（php55w为5.5版本，php56w为5.6）

• Step8：查看当前安装包，并与前面对比，缺少什么就用yuminstall命令进行安装



• yumlistinstalled|grepphp

• 至此PHP版本升级完成，但Apache并没有与版本绑定，

㈢ CentOS 6.5 使用yum安装lamp环境 php是5.3.3的 太低了

简单介绍一下，如何在CentOS上安装PHP5.6。
配置yum源
追加CentOS 6.5的epel及remi源。

#rpm-Uvh
#rpm-Uvh

#yuminstallepel-release
#rpm-ivh

#yumlist--enablerepo=remi--enablerepo=remi-php56|grepphp

#yuminstall--enablerepo=remi--enablerepo=remi-php56phpphp-opcachephp-develphp-mbstringphp-mcryptphp-mysqlndphp-phpunit-PHPUnitphp-pecl-xdebugphp-pecl-xhprof

#php--version
PHP5.6.0(cli)(built:Sep3201419:51:31)
Copyright(c)1997-2014ThePHPGroup
ZendEnginev2.6.0,Copyright(c)1998-2014ZendTechnologies
withZendOPcachev7.0.4-dev,Copyright(c)1999-2014,byZendTechnologies
withXdebugv2.2.5,Copyright(c)2002-2014,byDerickRethans

㈣ Centos更新PHP版本问题

直接编译安装新版的php，目录名跟旧的不重名就行。

然后指定某些软链接到新的目录下，配置信息php.ini，需要手动筛选移植。不过也可以尝试直接覆盖

㈤ 如何在linux上安装php5.6，谢谢，

不知道你问的linux，是哪个发行版本，常用的如 ubntu,centos,debian等。

我列一个centos7(服务器常用这个版本)的安装方法吧

centos7默认使用yum install 来安装程序，但默认源安装的php是5.4的，版本比较低，

要安装高版本的，要么下载源代码手动编译安装，但对不熟悉的，万一出点错误，会越搞越乱。我一般使用epel源安装php，里面各个版本都有，最新的php7.3

1. 首先安装epel

   rpm -ivh http://dl.fedoraproject.org/pub/epel/7/x86_64/Packages/e/epel-release-7-11.noarch.rpm

   这里面的url是目前我用的，如果提示出错，就是换url了，可以在电脑上手动打开epel源列表去检查 epel-release是哪个版本，换上对应的名字

2. 按版本安装php

rpm-Uvhhttps://mirror.webtatic.com/yum/el7/webtatic-release.rpm

yuminstallphp56wphp56w-mysqlphp56w-pdophp56w-gdphp56w-sslphp56w-mbstringphp56w-cliphp56w-xmlphp56w-bcmath

我这里列的是一些常用的php扩展，如果需要其它的，手动加上即可

如果需要安装php其它版本，把包名里的56改成对应版本即可 ,如

yuminstallphp71wphp71w-mysqlphp71w-pdophp71w-gdphp71w-sslphp71w-mbstringphp71w-cliphp71w-xmlphp71w-bcmath

yuminstallphp72wphp72w-mysqlphp72w-pdophp72w-gdphp72w-sslphp72w-mbstringphp72w-cliphp72w-xmlphp72w-bcmath

可对应安装php7.1和php7.2，这种安装方法，会默认配置好对应的设置，php.ini在/etc/中查找，命令行也默认启用了 (php-cli)

㈥ centos5，升级php后phpmyadmin无法登陆

一般情况是PHP.ini配置问题，根据下面的配置项再设置一次，然后重启服务器，试试！

(1) 设置扩展路径

查找 extension_dir 有这么一行

;extension_dir = "./"

在此行后面加入一行(注意是加入一行，不是加到后面)

extension_dir = "d:\php\ext"

其中d:\php是你安装php的路径。路径不正确将无法加载dll

(2) 查找 extension

extension=php_mbstring.dll

extension=php_gd2.dll

extension=php_mysql.dl

把上面3项前面的分号去掉，这样IIS启动时就可以加载这些dll了

(3) 设置会话保存路径

查找session.save_path 有这么一行

; session.save_path = "N;/path"

在此行后加入一行

session.save_path = "C:\Windows\Temp"

保存到你的临时目录下，这里完全可以保存到Windows临时目录Temp下

(4) 还有比较值得注意的是 short_open_tag 默认是Off的

也就是说 php不能使用短标记如 <? ?> 必须使用<?php ?>

由于短标记使用方便，并且很多程序也是用短短标记来写，如discuz等

如果不把 short_open_tag 改成On将出现的症状将很难判断是上面原因，这里建议修改

查找

short_open_tag = Off

改为

short_open_tag = On

(5) 是否显示错误 display_errors

出于安全性考虑，display_errors 也默认为 Off

就是说在调试时，如果php代码有误，就只出现一个空白页。而不会显示出错原因和出错行数。

这样调试起来将非常不便，建议根据自己需要修改

查找

reGISter_globals = Off

改成

register_globals = On

(6) register_globals

出于安全性考虑它默认也是Off

当register_globals=Off的时候，下一个程序接收的时候应该用$_POST['user_name']和$_POST['user_pass']）

当register_globals=On的时候，下一个程序可以直接使用$user_name和$user_pass来接受值。

建议根据自己需要修改

㈦ 阿里云上的centos 7.2怎么yum安装php 5.6

因之前通过网易的 centos 镜像，将阿里云的 centos 升级到最新版了，乘自己的项目尚未开始正式开发，遂将所有的相应环境都升级到最高。
查看 centos 版本：
[root@iZ23d ~]# cat /etc/centos-release
CentOS Linux release 7.2.1511 (Core)
1、删除之前的 php 版本：
[root@iZ23d ~]# yum remove php* php-common
Loaded plugins: langpacks
Repository base is listed more than once in the configuration
Repository updates is listed more than once in the configuration
Repository extras is listed more than once in the configuration
Repository centosplus is listed more than once in the configuration
No Match for argument: php-5.4.16
No Match for argument: php-5.4.16.tar.gz
No Match for argument: php-7.0.1RC1
No Match for argument: php-7.0.1RC1.tar.gz
No Match for argument: phpMyAdmin-4.4.0.tar.gz
No Match for argument: php-common
No Packages marked for removal
2、rpm 安装 Php7 相应的 yum源：
[root@iZ23d ~]# rpm -Uvh https://mirror.webtatic.com/yum/el7/webtatic-release.rpm
Retrieving https://mirror.webtatic.com/yum/el7/webtatic-release.rpm
warning: /var/tmp/rpm-tmp.LhJKKR: Header V4 RSA/SHA1 Signature, key ID 62e74ca5: NOKEY
Preparing... ################################# [100%]
package webtatic-release-7-3.noarch is already installed
3、 直接yum安装php7：
[root@iZ23d ~]# yum install php70w
Loaded plugins: langpacks
Repository base is listed more than once in the configuration
Repository updates is listed more than once in the configuration
Repository extras is listed more than once in the configuration
Repository centosplus is listed more than once in the configuration
Resolving Dependencies
--> Running transaction check
。。。 【省略】
Warning: RPMDB altered outside of yum.
Installing : php70w-common-7.0.0-1.w7.x86_64 1/3
Installing : php70w-cli-7.0.0-1.w7.x86_64 2/3
Installing : php70w-7.0.0-1.w7.x86_64 3/3
Verifying : php70w-7.0.0-1.w7.x86_64 1/3
Verifying : php70w-common-7.0.0-1.w7.x86_64 2/3
Verifying : php70w-cli-7.0.0-1.w7.x86_64 3/3
Installed:
php70w.x86_64 0:7.0.0-1.w7
Dependency Installed:
php70w-cli.x86_64 0:7.0.0-1.w7 php70w-common.x86_64 0:7.0.0-1.w7
Complete!
4、检查 php 版本：
[root@iZ23d ~]# php -v
PHP 7.0.0 (cli) (built: Dec 2 2015 20:42:32) ( NTS )
Copyright (c) 1997-2015 The PHP Group
Zend Engine v3.0.0, Copyright (c) 1998-2015 Zend Technologies
[root@iZ23d2e6hoqZ ~]#
以上显示安装成功！
5、重启 Apache，查看 phpinfo :
[root@iZ23d ~]# systemctl restart httpd.service
检查phpinfo:
PHP Version 7.0.0
SystemLinux iZ23d 3.10.0-229.11.1.el7.x86_64 #1 SMP Thu Aug 6 01:06:18 UTC 2015 x86_64
Build DateDec 2 2015 20:43:38
Server APIApache 2.0 Handler
Virtual Directory Supportdisabled
Configuration File (php.ini) Path/etc
Loaded Configuration File/etc/php.ini
Scan this dir for additional .ini files/etc/php.d
Additional .ini files parsed/etc/php.d/bz2.ini, /etc/php.d/calendar.ini, /etc/php.d/ctype.ini, /etc/php.d/curl.ini, /etc/php.d/exif.ini, /etc/php.d/fileinfo.ini, /etc/php.d/ftp.ini, /etc/php.d/gettext.ini, /etc/php.d/gmp.ini, /etc/php.d/iconv.ini, /etc/php.d/json.ini, /etc/php.d/phar.ini, /etc/php.d/shmop.ini, /etc/php.d/simplexml.ini, /etc/php.d/sockets.ini, /etc/php.d/tokenizer.ini, /etc/php.d/xml.ini, /etc/php.d/zip.ini
PHP API20151012
PHP Extension20151012
Zend Extension320151012
Zend Extension BuildAPI320151012,NTS
PHP Extension BuildAPI20151012,NTS
Debug Buildno
Thread Safetydisabled
Zend Signal Handlingdisabled
Zend Memory Managerenabled
Zend Multibyte Supportdisabled
IPv6 Supportenabled
DTrace Supportenabled
Registered PHP Streamshttps, ftps, compress.zlib, php, file, glob, data, http, ftp, compress.bzip2, phar, zip
Registered Stream Socket Transportstcp, udp, unix, udg, ssl, sslv3, sslv2, tls, tlsv1.0, tlsv1.1, tlsv1.2
Registered Stream Filterszlib.*, string.rot13, string.toupper, string.tolower, string.strip_tags, convert.*, consumed, dechunk, bzip2.*, convert.iconv.*
This program makes use of the Zend Scripting Language Engine:
Zend Engine v3.0.0, Copyright (c) 1998-2015 Zend Technologies
Configuration
apache2handler
Apache VersionApache/2.4.6 (CentOS)
Apache API Version20120211
Server [email protected]
Hostname:Portxxxx.xxxxx.xxx:0
User/Groupapache(48)/48
Max RequestsPer Child: 0 - Keep Alive: on - Max Per Connection: 100
TimeoutsConnection: 60 - Keep-Alive: 15
Virtual ServerYes
Server Root/etc/httpd
Loaded Molescore mod_so http_core mod_access_compat mod_actions mod_alias mod_allowmethods mod_auth_basic mod_auth_digest mod_authn_anon mod_authn_core mod_authn_dbd mod_authn_dbm mod_authn_file mod_authn_socache mod_authz_core mod_authz_dbd mod_authz_dbm mod_authz_groupfile mod_authz_host mod_authz_owner mod_authz_user mod_autoindex mod_cache mod_cache_disk mod_data mod_dbd mod_deflate mod_dir mod_mpio mod_echo mod_env mod_expires mod_ext_filter mod_filter mod_headers mod_include mod_info mod_log_config mod_logio mod_mime_magic mod_mime mod_negotiation mod_remoteip mod_reqtimeout mod_rewrite mod_setenvif mod_slotmem_plain mod_slotmem_shm mod_socache_dbm mod_socache_memcache mod_socache_shmcb mod_status mod_substitute mod_suexec mod_unique_id mod_unixd mod_userdir mod_version mod_vhost_alias mod_dav mod_dav_fs mod_dav_lock mod_lua prefork mod_proxy mod_lbmethod_bybusyness mod_lbmethod_byrequests mod_lbmethod_bytraffic mod_lbmethod_heartbeat mod_proxy_ajp mod_proxy_balancer mod_proxy_connect mod_proxy_express mod_proxy_fcgi mod_proxy_fdpass mod_proxy_ftp mod_proxy_http mod_proxy_scgi mod_proxy_wstunnel mod_ssl mod_systemd mod_cgi mod_perl mod_php7
以上显示 php7 安装成功！

㈧ 如何在centos 5.5上升级php版本

直接编译你想要的PHP版本，然后把 bin sbin 目录下的PHP，指向到新安装目录中的。
然后把几个PHP API文件也换成新安装目录中的。

㈨ 如何在CentOS 6.5上升级PHP

在更新PHP之前，先查看下当前PHP版本，避免重复的更新
# php -v
如何在CentOS 6.5上升级PHP
检查当前PHP的安装包
# yum list installed | grep php
如何在CentOS 6.5上升级PHP
移除当前PHP的安装包，否则容易起冲突
# yum remove php*
如何在CentOS 6.5上升级PHP
由于默认的YUM源无法升级PHP，所以需要添加第三方的YUM源，此处用到webtatic。
因为是CentOS 6.5，所以用以下URL
# rpm -Uvh http://mirror.webtatic.com/yum/el6/latest.rpm
如果是CentOS 7.x
rpm -Uvh https://mirror.webtatic.com/yum/el7/epel-release.rpm
rpm -Uvh https://mirror.webtatic.com/yum/el7/webtatic-release.rpm
如何在CentOS 6.5上升级PHP
查看YUM源上能用PHP安装包
＃ yum list php*
如何在CentOS 6.5上升级PHP
安装PHP5.5及需要的扩展
# yum install php55w php55w-devel php55w-common php55w-mysql php55w-pdo php55w-opacache php55w-xml
如何在CentOS 6.5上升级PHP
再次查看PHP版本，以确认安装是否成功
如何在CentOS 6.5上升级PHP
对了，如果你的PHP要用到Redis，请别忘了安装php-redis 扩展
＃ yum install php-redis
如何在CentOS 6.5上升级PHP
如对您有帮助，望采纳，谢谢