1. 单片机英文文献及翻译，2200字左右
Single-Chip Microcomputer
有的时候，也可以用SingleChip来代替
下面链接的第六章有讲单片机Single Chip Microcmputer 第148页开始
http://books.google.co.nz/books?id=AUtTx3TgO7IC&pg=PT41&lpg=PT41&dq=what+is+Single+Chip+Microcomputer&source=web&ots=QQqVentmyy&sig=ZPBVtVXwiQakAtCIXJqzRw_BobE&hl=en&sa=X&oi=book_result&resnum=8&ct=result#PPT41,M1
这是一段中汉对照的。
中文:
单片机是把主要计算机功能部件都集成在一块芯片上的微型计算机。它是一种集计数和多中接口于一体的微控制器，被广泛应用在智能产品和工业自动化上，而51单片机是个单片机中最为典型和最有代表性的一种。
本课题选择89S51为核心控制元件，设计了一个日常生活中用到的电子音乐门铃系统。当功能按键按下，音乐响起，发光二极管随着音乐的节拍进行闪烁，LED显示相应的定时器初值。音乐演奏过程中再次按下按键无效，只有当音乐段结束再次按下才有效。如果是电子音乐门铃在响，按下复位按键就终止，显示初始状态。经过实践证明，本系统运行稳定，具有一定的实用价值。
-------------
翻译:
SCM is a major piece of computer components are integrated into the chip micro-computer. It is a multi-interface and counting on the micro-controller integration, and intelligence procts are widely used in instrial automation. and MCS-51 microcontroller is a typical and representative.
The topics chosen for the 89S51 control of the core components used in the design of a daily electronic music doorbell system. When the function button is pressed, the music sounded and the music beats with light emitting diodes for flickered. Initial corresponding LED timer. Musical process again pressed the button ineffective, and only when pressed again before the end of the music effectively. If the doorbell ring for electronic music, press the button on the rection and termination, showed initial state. Practice has proved that the system is stable and has some practical value.
本设计是以凌阳16位单片机为重心，介绍语音控制在机械手中的应用，实现微型舵机的运作，完成所指定的动作。其中通过凌阳16位单片机输出的脉冲信号来准确的控制机械手的摆动角度，机械手的捏拿动作由电磁铁完成，电磁铁的通断由凌阳16位单片机的I/O口控制，硬件和软件都在具体的实验中证明了其可行性
This design is take insults the positive 16 monolithic integrated circuits as a center of gravity, introced the pronunciation control in manipulator's application, the realization miniature servo operation, completes the movement which assigns. Through insults the pulse signal which the positive 16 monolithic integrated circuits outputs to come the accurate control manipulator to swing the angle, the manipulator pinches takes the movement to complete by the electro-magnet, the electro-magnet passes the legal reason for judgment to insult the positive 16 monolithic integrated circuits I/O control, the hardware and the software all have proven its feasibility in the concrete experiment
2. 找些10个51单片机的参考文献名字，就是设计最后的那个参考文献。。 外文文献至少5篇
外文文献有,但怎么提供给你呢,至于翻译没有,翻译得靠你自己了,如果需要的话回复留个邮箱地址即可,希望能帮到你,多多给点悬赏分吧,急用的话请多选赏点分吧,这样更多的知友才会及时帮到你,我从文献资料中找...
3. 怎么查找关于毕业设计所需的外文文献 我本科是学电气的 课题名称是《基于单片机的门控系统设计》
去下载期刊吧，cnki国内的败誉，sci是外国的
都是论文，建议看国外的，国内的很多都是炒来炒去枝枯告的。你们学校应该是有购买的，从你们学校的端口进去查吧，好猛明好珍惜机会啊，出来了，就用不了，买不起啊。
4. 急求一份关于单片机红外遥控电子密码锁相关的参考文献。来5份左右外文的。多多益善。先谢谢啦。
[1] 于殿泓，王新年．单片机原理与程序设计实验教程[M]．西安：西安电子科技大学出版社，2007，8．
[2] 赵文博，刘文涛．单片机语言C51程序设计[M]．北京：人民邮电出版社，2005，10．
[3] 李爱秋．红外线遥控12位电子密码锁的设计[J]． 温州职业技术学院学报第8卷第一期，2008．
[4] 陈杰，黄鸿．传感器与检测技术[M]．北京:高等教育出版社，2010，8．
[5] 周航慈. 单片机应用程序设计技术[M]. 北京：北京航空航天大学出版社，2011，2．
[6] 李朝青. 单片机原理及接口技术[M]. 北京：北京航空航天大学出版社, 2005，10．
[7] 孙育才. MCS-51系列单片微型计算机及其应用[M]. 东南大学出版社, 2004，6．
[8] 沈红卫. 单片机应用系统设计实力与分析[M]. 北京:北京航空航天大学出版社，2003.
[9] 徐爱钧, 彭秀华. 单片机高级语言C51应用程序设计[M].北京航空航天大学出版社，2006．
[10] 曾一江. 单片微机原理与接口技术[M]. 北京：科技出版社,2009，12．
[11] 康华光. 电子技术基础（模拟部分）[M]. 北京：高等教育出版社, 2004，4．
[12] Nishino S F,Paoli G C,Spain J C. Aerobic degradation of dinitroto-luenes and pathway for bacterial degradation of 2,6-dinitrotoluene Volume 66,2006.
[13] Kennes C,W M Wu,L Bhatnagar et al. Anaerobic dechlorination and mineralization of PCP and 2,4,6-trichlorophenol by the methanogenic PCP-degrading granules Volume 44,2004.
[14] Philips. Proct Specification. COMS single-chip 8-bit microcontroller.
[15] Hermarn K P. Neubert. Instrument Transcers-An Introction to their Performance and Design.2nd Ed[M]. Clarendon Press, Oxford. 1975.
5. 单片机英文参考文献
单片机英文参考文献
[1] 李广弟等 单片机基础 北京航空航天出版社， 2001.7
[2] 楼然苗等 51 系列单片机设计实例 北京航空轿宴航天出版社， 2003.3
[3] 唐俊翟等 单片机原理与应用 冶金工业出版社， 2003.9
[4] 刘瑞新等 单片机原理及应用教程 机械工业出版社， 2003.7
[5] 吴国经等 单片机应用技术 中国电力出版社， 2004.1
[6] 李全利，迟荣强编着 单片机原理及接口技术 高等教育出版社，2004.1
[7] 侯媛彬等，凌阳单片机原理及其毕业设计精选 2006年，科学出版社
银羡[8] 罗亚非，凌阳十六位单片机应用基础2003年 北京航空航天大学出版社
[9] 北京北阳电子有限公司，061A凌阳单片机及其附带光盘2003年
[10] 张毅刚等， MCS-51单片机应用设计，哈工大出版社，2004年第2版
[11] 霍孟友等，单片机原理与应用，机械工业出版社，2004.1
[12] 霍孟友等，单片机原理与应用学习概要及题解，机械工业出版社，闭搏银2005.3
[13] 许泳龙等，单片机原理及应用，机械工业出版社，2005.1
[14] 马忠梅等，单片机的C语言应用程序设计，北京航空航天大学出版社，2003修订版
[15] 薛均义 张彦斌 虞鹤松 樊波，凌阳十六位单片机原理及应用，2003年，北京航空航天大学出版社 ;
6. 求单片机参考文献，中文的有相应的外文翻译
[1]杨十元.模拟系统故障诊断与可靠性设计，清华人学出版社，2004
[2]童诗白.模拟电子技术基础，高教出版社，2006
[3]周航慈.单片机应用程序设计技术，北京航空航大大学出版社，2005
[4]李刚.ADuC812系列单片机原理和应用技术，北京航空航天山版社，2005
[5]胡诞康.在线测试技术的发展与展望，计量与测试技术，2001
[6]星河科技开发公司，印刷电路板在线测试系统的发展与应用，电子标准化与测量，2003
[7]季华.PCB测试技术的综合利用，电子产品世界，2007-12
[8]鲜坛.组装测试技术应用前景分析，世界电子元器件，2008-1
[9]张金敏.基于单片机控制的智能电阻电容在线测试仪，甘肃科技，2006
[10]庄绍雄王济浩张迎春.智能阻容在线测试技术，山东工业大学学报，
[11]陈国顺陈春沙王格芳等.通用电路板在线测试仪设计与开发，仪器仪表学报，2001
[12]Nancy Hplland.Automated Instruments Smooth Rapid Test System Development.Test & Measurement World,AUGUST 2001
[13]卢育强.如何设定ICT的上下限，电子生产设备，2003 142-143
[14]赵悦 沈青松 终玉军.路板的测试技术，辽宁工学院学报，2008-1
[15]程亚黎 曾周末.电路故障自动测试与诊断系统，中国仪器仪表，2007
7. 关于单片机的参考文献要具体页码， 要求至少出现2篇英文,期刊需要页码，有的发我邮箱，[email protected]
[1] 张毅刚.《新编MCS51单片机应用设计（第三版）》，哈尔滨：哈尔滨工业大学出版社，2008
[2] 何立民.《单片机应用技术选编》，北京：北京航空大学出版社，1998
[3] 李华.《MCS-51系列单片机使用接口技术》，北京：北京航空航天大学出版社，1993
[4] 彭为.《单片机典型系统设计实例精讲》，北京：电子工业出版社，2006
[5] 潘永雄.《新编单片机原理与应用》，西安：西安电子科技大学出版社，2003
[6] 童诗白,华成英，《模拟电子技术基础》，北京：高等教育出版社，2000
[7] 阎石主.《数字电子技术基础》，北京：高等教育出版社，1998
[8] 樊昌信,曹丽娜.《通信原理》，北京：国防工业出版社，2007
[9] 李瀚荪.《电路分析基础》，北京：高等教育出版社1991
毕 业 论 文（设 计）开 题 报 告
[10]G.Edward Suh, Charles W．O’Donnell， Srinivas Devadas， Aegis：a single-chip secure processor, IEEE Design and Test of Computers．2008，24（6）570－580．
[11] Mt. Prospect.MCS 51 Family of Microcontrollers Architectural Overview. September 1993
8. 求关于单片机的外文文献 急急急
1. About SCM It can be said across the twentieth century, the three "electric" era, that is, electrical era, the electronic age, and has now entered the computer age. However, such a computer, usually refers to the personal computer, referred to as PC. It consists of the host, keyboard, monitor etc.. Another type of computer, most people do not know how. This computer is to smart to give a variety of mechanical microcontroller (also known as micro-controller). As the name suggests, this computer system only used the smallest one IC, you can perform simple operations and control. Because of its small size, usually hidden in a charged mechanical "stomach" Lane. It is the entire device, like the human brain plays a role, it goes wrong, the whole device was paralyzed. Now, this MCU has a very wide field of use, such as smart meters, real-time instrial control, communications equipment, navigation systems, home appliances and so on. Once the microcontroller were using a variety of procts, you can serve to upgrade the effectiveness of the proct, often in the proct name is preceded by the adjective - "smart", such as washing machines and so intelligent. At present, some technical personnel of factories or other amateur electronics developers to engage in out of certain procts, not the circuit is too complex, that is, functions are too simple and easy to be copied. The reason may be stuck in the proct without the use of a microcontroller or other programmable logic device. SCM basic component is a central processing unit (CPU in the computing device and controller), read-only memory (usually expressed as a ROM), read-write memory (also known as Random Access Memory MRAM is usually expressed as a RAM) , input / output port (also divided into parallel port and serial port, expressed as I / O port), and so composed. In fact there is also a clock circuit microcontroller, so that ring operation and control of the microcontroller, can rhythmic manner. In addition, there are so-called "break system", the system is a "janitor" role, when the microcontroller control object parameters that need to be intervention to reach a particular state, can after this "janitor" communicated to the CPU, so that CPU priorities of the external events to take appropriate counter-measures. 单片机的简介可以说，二十世纪跨越了三个“电”的时代，即电气时代、电子时代和现已进入的电脑时代。不过，这种电脑，通常是指个人计算机，简称PC机。它由主机、键盘、显示器等组成。还有一类计算机，大多数人却不怎么熟悉。这种计算机就是把智能赋予各种机械的单片机（亦称微控制器）。顾名思义，这种计算机的最小系统只用了一片集成电路，即可进行简单运算和控制。因为它体积小，通常都藏在被控机械的“肚子”里。它在整个装置中，起着有如人类头脑的作用，它出了毛病，整个装置就瘫痪了。现在，这种单片机的使用领域已十分广泛，如智能仪表、实时工控、通讯设备、导航系统、家用电器等。各种产品一旦用上了单片机，就能起到使产品升级换代的功效，常在产品名称前冠以形容词——“智能型”，如智能型洗衣机等。现在有些工厂的技术人员或其它业余电子开发者搞出来的某些产品，不是电路太复杂，就是功能太简单且极易被仿制。究其原因，可能就卡在产品未使用单片机或其它可编程逻辑器件上。单片机的基本组成是由中央处理器（即CPU中的运算器和控制器）、只读存贮器（通常表示为ROM）、读写存贮器（又称随机存贮器通常表示为RAM）、输入/输出口（又分为并行口和串行口，表示为I/O口）等等组成。实际上单片机里面还有一个时钟电路，使单片机在进行运算和控制时，都能有节奏地进行。另外，还有所谓的“中断系统”，这个系统有“传达室”的作用，当单片机控制对象的参数到达某个需要加以干预的状态时，就可经此“传达室”通报给CPU，使CPU根据外部事态的轻重缓急来采取适当的应付措施。
9. 关于单片机控制步进电机的英文参考文献
文献蚂举1:
This project aimed to develop a wireless system to detect and allow only the authorized persons. The system was based on Radio Frequency Identification (RFID) technology and consists of a passive RFID tag. The passive micro transponder tag collects power from the 125 KHz magnetic field generated by the base station, gathers information about the Tag ID and sends this information to the base station. The base station receives, decodes and checks the information available in its Database and Manchester code was used to send those information. The system performed as desired with a 10cm diameter antenna attached to the transponder. The Base Station is built by using the Popular 8051 family Microcontroller. It gets the tag ID and if the tag ID is stored in its memory then the microcontroller will allow the person inside.
RFID Reader Mole, are also called as interrogators. They convert radio waves returned from the RFID tag into a form that can be passed on to Controllers, which can make use of it. RFID tags and readers have to be tuned to the same frequency in order to communicate. RFID systems use many different frequencies, but the most common and widely used Reader frequency is 125 KHz.
全部内高卖容及下载戚物逗地址:
http://www.8051projects.net/downloads137.html
---------------------------------------------------------------
文献2:
Choose controller according to your requirements of program memory(flash), RAM, ADC, EEPROM. 16kB of flash is sufficient to implement floodfill algorithm. If you are thinking of implementing floodfill algorithm then 256 bytes are required to store Map of the maze and 512 bytes are required for processing so you need atleast 1kBRAM to implement floodfill. ATmega16,32 and PIC18f452 are some controllerspopularly used in micromouse. If you are thinking of building just a wall follower then simple 8051 based controller likeAT89s52 can also be used. Stepper driving:Please read http://www.triindia.co.in/resources/?p=40 a step by step stepper motor guidefirst. There are two types of motors a) unipolar b) bipolar. Unipolar stepper motors can be used as bipolar steppers so prefer unipolar whilepurchasing stepper. You can use simple ULN2803 IC the circuit can be found in 8051 microcontroller by Mazidi. ULN2803 has eight darlington pair in a single package. It hascurrent carrying capacity of 500mA. so it will get heated up frequently will get damaged.So two ULN2803 can be connected in parallel to fix the problem but this is a chalta haiway of driving stepper.
全部见:
http://66.102.9.104/search?q=cache:8fC6eNhdpGEJ:graigroup.files.wordpress.com/2008/04/micromouse1.pdf+stepper+motor+AT89S52&hl=en&ct=clnk&cd=21&gl=uk
---------------------------------------------------------------文献3:
Stepper Motor Advantages
and Disadvantages
Advantages
1. The rotation angle of the motor is
proportional to the input pulse.
2. The motor has full torque at stand-
still (if the windings are energized)
3. Precise positioning and repeat-
ability of movement since good
stepper motors have an accuracy of
3 – 5% of a step and this error is
non cumulative from one step to
the next.
4. Excellent response to starting/
stopping/reversing.
5. Very reliable since there are no con-
tact brushes in the motor.
Therefore the life of the motor is
simply dependant on the life of the
bearing.
6. The motors response to digital
input pulses provides open-loop
control, making the motor simpler
and less costly to control.
7. It is possible to achieve very low
speed synchronous rotation with a
load that is directly coupled to the
shaft.
8. A wide range of rotational speeds
can be realized as the speed is
proportional to the frequency
全文见:
http://72.14.235.104/search?q=cache:v1op7zKvYDEJ:library.solarbotics.net/pdflib/pdf/motorbas.pdf+stepper+motor&hl=en&ct=clnk&cd=9&gl=uk
10. 求关于单片机或LCD的外文文献 要书名，作者， 出版社，第几版，时间.
[1]Bo Ran Han,Zheng Liu,You Zhou,Kai Zhou. Queue System Based on GSM Modem and Single Chip Microcomputer’s Communication[J]. Advanced Materials Research,2012,1566(433).
[2]Bing Liu,Tao Wu. Design and Application of Single Chip Microcomputer in SCR Light Regulation Circuit[J]. Applied Mechanics and Materials,2013,2754(431).
[3]Min Cao. A Study of Visual Wireless Control System Based on MCU in Power Plants[J]. Applied Mechanics and Materials,2014,2808(448).
[4]Jun Jie Lin,Chun Yang Wang,Da Sen Wang. Arbitrary Integer Frequency Divider Based on Single Chip Microcomputer[J]. Applied Mechanics and Materials,2014,2789(441).
[5]Hong Li,Si Qing Zhang. Design for Robot Control Board Based on AVR Single Chip Microcomputer[J]. Applied Mechanics and Materials,2014,2935(484).
[6]Qi Guo Yao,Yu Liang Liu. Reliability Design of Ship Main Engine Remote Control System Based on Single Chip Microcomputer[J]. Applied Mechanics and Materials,2014,3207(556).
[7]Jian Pu Bia,Mei Xia Gao. Design of Ultrasonic Rangefinder Controlled by Single Chip Microcomputer[J]. Applied Mechanics and Materials,2014,3360(599).
[8]Dan Tong Zhang. Research on University Classroom Lighting Energy Saving Intelligence Control System Based on Single Chip Microcomputer[J]. Advanced Materials Research,2014,3470(1030).
[9]Qing Zhuang. Weighing System Design Based on Single Chip Microcomputer[J]. Advanced Materials Research,2015,3701(1070).
[10]Yishan Zeng,Jun Qian. Designs of a fire detecting and fire pre-warning system based on single chip microcomputer[J]. Procedia Engineering,2010,7.
中国知网，网络学术，谷歌学术
上面都可查找