单片机英文文献

① 求：有关MCS-51单片机的英文文献

MCS-51单片机指令系统集（英文注释）

原先帖子（内容相同）的被锁定了！各位，不好意思啊！麻烦宋老师把原先的开掉！
MCS-51指令系统集（英文注释）
若帖子中若有疏漏或谬误之处，敬请及时批评指正，以免误导真正“新手上路”的年轻小虾们！

按功能分为五大类：

（1）数据传送类指令（7种助记符）
MOV（英文为Move）：对内部数据寄存器RAM和特殊功能寄存器SFR的数据进行传送；
MOVC（Move Code）读取程序存储器数据表格的数据传送；
MOVX (Move External RAM) 对外部RAM的数据传送；
XCH (Exchange) 字节交换；
XCHD (Exchange low-order Digit) 低半字节交换；
PUSH (Push onto Stack) 入栈；
POP (Pop from Stack) 出栈；

（2）算术运算类指令（8种助记符）
ADD(Addition) 加法；
ADDC(Add with Carry) 带进位加法；
SUBB(Subtract with Borrow) 带借位减法；
DA(Decimal Adjust) 十进制调整；
INC(Increment) 加1；
DEC(Decrement) 减1；
MUL(Multiplication、Multiply) 乘法；
DIV(Division、Divide) 除法；

(3)逻辑运算类指令（10种助记符）
ANL(AND Logic) 逻辑与；
ORL(OR Logic) 逻辑或；
XRL(Exclusive-OR Logic) 逻辑异或；
CLR(Clear) 清零；
CPL(Complement) 取反；
RL(Rotate left) 循环左移；
RLC(Rotate Left throught the Carry flag) 带进位循环左移；
RR(Rotate Right) 循环右移；
RRC (Rotate Right throught the Carry flag) 带进位循环右移；
SWAP (Swap) 低4位与高4位交换；

(4)控制转移类指令（17种助记符）
ACALL（Absolute subroutine Call）子程序绝对调用；
LCALL（Long subroutine Call）子程序长调用；
RET（Return from subroutine）子程序返回；
RETI（Return from Interruption）中断返回；
SJMP（Short Jump）短转移；
AJMP（Absolute Jump）绝对转移；
LJMP（Long Jump）长转移；
CJNE (Compare Jump if Not Equal)比较不相等则转移；
DJNZ (Decrement Jump if Not Zero)减1后不为0则转移；
JZ (Jump if Zero)结果为0则转移；
JNZ (Jump if Not Zero) 结果不为0则转移；
JC (Jump if the Carry flag is set)有进位则转移；
JNC (Jump if Not Carry)无进位则转移；
JB (Jump if the Bit is set)位为1则转移；
JNB (Jump if the Bit is Not set) 位为0则转移；
JBC(Jump if the Bit is set and Clear the bit) 位为1则转移，并清除该位；
NOP (No Operation) 空操作；

（5）位操作指令（1种助记符）
SETB(Set Bit) 位 置1 。

下次抽空将各条指令的用法，用我自己地话（个人的理解），再来“牛”一下，以供参考。同时，我也很希望各位大虾，多“出版”一些高质量的好东东（包括学习心得），最好系统些。给像我这样的班门弄斧的小虾，做做榜样，引引路，好让真正“新手上路”的单片机爱好者少走弯路，我想，这时我们单片机初学者共同的心声！所谓愚者千虑，必有一得，我们小虾们，在学习中发现的东东多往上帖帖，就当作是练习吧！
互相协作！

② 求单片机英文参考文献

【1】V.
Yu.
Teplov,A.
V.
Anisimov.
Thermostatting
System
Using
a
Single-Chip
Microcomputer
and
Thermoelectric
Moles
Based
on
the
Peltier
Effect[J]
,2002
【2】
Yeager
Brent.How
to
troubleshoot
your
electronic
scale[J]..
Powder
and
Bulk
Engineering.
1995
【3】Meehan
Joanne,Muir
Lindsey.SCM
in
Merseyside
SMEs:Benefits
and
barriers[J]..
TQM
Journal.
2008
看着有用的用吧，单片机很多东西，也不知道你的具体是哪个方面的。

③ 急求关于单片机的外文参考文献五篇，不要具体内容，只要标题，作者，年份，类型等就可以了

[1] 李东升等.protel 99SE电路设计教程.电子工业出版社,2007.1
[2] 藏春华等.电子线路设计与应用.高等教育出版社,2004.7
[3] 李学海.16位单片机SPCE061A使用教程——基础篇.人民邮电出版社,2007
[4] 张琳娜,刘武发．传感检测技术及应用.中国计量出版社,1999
[5] 邵敏权,刘刚.单片机原理实验及应用.吉林科学技术出版社,1995.1
[6] 杨振江等.智能仪器与数据采集系统中的新器件及应用.西安电子科技大学出版 社,2001.12
[7] 罗亚非等.凌阳16位单片机应用基础.北京航空航天大学出版社,2005.5
[8] 刘笃仁,韩保君.传感器原理及应用技术。机械工业出版社,2003.8
[9] 薛筠义,张彦斌.凌阳16位单片机原理及应用,2003.2
[10] 徐爱卿.Intel 16位单片机,2002.7
[11] 霍孟友等，单片机原理与应用机械工业出版社，2004.1
[12] 霍孟友等，单片机原理与应用学习概要及题解，机械工业出版社，2005.3
[13] 许泳龙等，单片机原理及应用，机械工业出版社，2005.1
[14] 马忠梅等，单片机的C语言应用程序设计，北京航空航天大学出版社，2003修订版
[15] 薛均义 张彦斌 虞鹤松 樊波，凌阳十六位单片机原理及应用，2003年，北京航空航天大学出版社.

④ 关于单片机方面的英文文献，最还有翻译

基于单片机的电子表设计
摘要：近年来随着计算机在社会领域的渗透和大规模集成电路的发展，单片机的应用正在不断地走向深入，由于它具有功能强，体积小，功耗低，价格便宜，工作可靠，使用方便等特点，因此特别适合于与控制有关的系统，越来越广泛地应用于自动控制，智能化仪器，仪表，数据采集，军工产品以及家用电器等各个领域，单片机往往是作为一个核心部件来使用，在根据具体硬件结构，以及针对具体应用对象特点的软件结合，以作完善。
本次做的电子表是以单片机（AT89S51）为核心，结合相关的元器件（共阴极LED数码显示器、BCD-锁存/7段译码等），再配以相应的软件，达到实现时钟日历显示的功能，也具有日历计算、显示和时钟、日历的校准，以及多路开关定时输出等功能，其硬件部分难点在于元器件的选择、布局及焊接。
Based on the design of electronic SCM
Abstract: In recent years, with computer penetration in the social sphere and the development of large-scale integrated circuits, MCU applications are constantly deepening, as it has a function of strong, small size, low power consumption, cheap, reliable, Easy to use, and other characteristics, and therefore particularly suited to control the system, more widely used in automatic control, intelligent instruments, meters, data acquisition, military procts and household appliances, and other fields, the MCU is often as a core Parts to use, in accordance with specific hardware and application-specific characteristics of the object with software to make perfect.
This is done in electronic form SCM (AT89S51) as the core, the combination of related components (of cathode LED digital display, BCD-latch / 7 of the decoder, and so on), Coupled with the corresponding software, to achieve Clock calendar shows that the function of the calendar also calculated, display and the clock, the calendar of calibration, and multi-channel Kaiguandingshi output, and other functions, some of its hardware components is difficult choice, layout and welding.

⑤ 单片机 英文文献及对应翻译

bus 公共汽车
driver 汽车司机
double decker bus 双层公共汽车
coach, motor coach, bus 大客车
taxi, taxicab 计程汽车, 出租汽车
trolleybus 无轨电车
tramcar, streetcar 电车, 有轨电车
underground, tube, subway 地铁
stop 停车站
taxi rank, taxi stand 计程汽车车站, 出租汽车总站
taxi driver, cab driver 出租车司机
conctor 售票员
inspector 检查员, 稽查员
ride 乘车
minimum fare (of a taxi) 最低车费

railway 铁路 (美作:railroad)
track 轨道
train 火车
railway system, railway net-work 铁路系统
express train 特别快车
fast train 快车
through train 直达快车
stopping train, slow train 慢车
excursion train 游览列车
commuter train, suburban train 市郊火车
railcar 轨道车
coach, carriage 车厢
sleeping car, sleeper 卧车
dining car, restaurant car, luncheon car 餐车
sleeper with couchettes 双层卧铺车
berth, bunk 铺位
up train 上行车
down train 下行车
luggage van, baggage car 行李车
mail car 邮政车
station, railway station 车站
station hall 车站大厅
booking office, ticket office 售票处
ticket-collector, gateman 收票员
platform 月台, 站台
platform ticket 站台票
buffet 小卖部
waiting room 候车室
platform bridge 天桥
left-luggage office 行李暂存处
platform-ticket 验票门
terminal, terminus 终点站
coach, passenger train 客车
car attendant, train attendant 列车员
guard, conctor 列车长
rack, baggage rack 行李架
left-luggage office 行李房 (美作:checkroom)
registration 登记
timetable 时刻表
change, transfer 换乘
connection 公铁交接处
ticket inspector 验票员
porter 搬运工人
to change trains at... 在（某地）换车
the train is e at... 在（某时）到达
to break the journey 中途下车

boat, ship 船
(passenger) liner 邮轮, 客轮
sailing boat, sailing ship 帆船
yacht 游船
(ocean) liner 远洋班轮
packet boat 定期客船, 班轮
cabin 船舱
hovercraft 气垫船
life buoy 救生圈
lifeboat 救生艇
life jacket 救生衣
berth, cabin, stateroom 客舱
first-class stateroom (cabin) 头等舱
second-class stateroom (cabin) 二等舱
steerage, third-class 三等舱
steerage 统舱
gang-plank 跳板
crossing 横渡
cruise 游弋
to embark, to ship 乘船
to land 抵岸, to sail at a speed of 20 knots, 航速为20节
to transship 换船
to disembark 上岸
to board a ship; to embark; to go aboard 上船
to disembark from a ship, to go ashore, to land 下船
on board a ship, aboard 在船上
to stop over at... 中途在…停留

civil aviation 民用航空
plane, aircraft, airplane 飞机
airliner 班机
jet, supersonic plane 喷气机
airliner, passenger aircraft 客机
medium-haul aircraft 中程飞机
long-range aircraft, long-haul aircraft 远程飞机
propeller-driven aircraft 螺旋桨飞机
jet (aircraft) 喷气飞机
turbofan jet 涡轮风扇飞机
turboprop 涡轮螺旋桨飞机
turbojet 涡轮喷气飞机
by air, by plane 乘飞机
airline 航空线
passenger cabin 客舱
tourist class 普通舱, 经济舱
first class 一等舱
waiting list 登机票名单
customs formalities 报关单
boarding check 登机牌
airport 航空港
air terminal 航空集散站
tarmac 停机坪
air hostess, stewardess 空中小姐, 女乘务员
steward 乘务员
aircraft crew, air crew 机组, 机务人员
pilot 驾驶员, 机长
takeoff 起飞
landing 着陆
to board a plane, get into a plane 上飞机
to get off a plane, alight from a plane 下飞机
non-stop flight to 飞往, 直飞
in transit 运送中的
air pocket 气潭, 气阱

⑥ 关于单片机的英文文献以及论文

Each DS18B20 has a unique 64-bit serial code, which allows multiple DS18B20s to function on the same 1–wire bus; thus, it is simple to use one microprocessor to control many DS18B20s distributed over a large area. Applications that can benefit from this feature include HVAC environmental controls, temperature monitoring systems inside buildings, equipment or machinery, and process monitoring and control systems.

这是DS18B20的一部分英文文献，我还有更多各类单片机的英文文献及翻译，需要的联系我！！！！

⑦ 求单片机 英文参考文献

【1】V. Yu. Teplov,A. V. Anisimov. Thermostatting System Using a Single-Chip Microcomputer and Thermoelectric Moles Based on the Peltier Effect[J] ,2002
【2】 Yeager Brent.How to troubleshoot your electronic scale[J].. Powder and Bulk Engineering. 1995
【3】Meehan Joanne,Muir Lindsey.SCM in Merseyside SMEs:Benefits and barriers[J].. TQM Journal. 2008
看着有用的用吧，单片机很多东西，也不知道你的具体是哪个方面的。

⑧ 求有关单片机英文文献及翻译，毕业设计用的！

1. About SCM
It can be said across the twentieth century, the three "electric" era, that is, electrical era, the electronic age, and has now entered the computer age. However, such a computer, usually refers to the personal computer, referred to as PC. It consists of the host, keyboard, monitor etc.. Another type of computer, most people do not know how. This computer is to smart to give a variety of mechanical microcontroller (also known as micro-controller). As the name suggests, this computer system only used the smallest one IC, you can perform simple operations and control. Because of its small size, usually hidden in a charged mechanical "stomach" Lane. It is the entire device, like the human brain plays a role, it goes wrong, the whole device was paralyzed.
Now, this MCU has a very wide field of use, such as smart meters, real-time instrial control, communications equipment, navigation systems, home appliances and so on. Once the microcontroller were using a variety of procts, you can serve to upgrade the effectiveness of the proct, often in the proct name is preceded by the adjective - "smart", such as washing machines and so intelligent. At present, some technical personnel of factories or other amateur electronics developers to engage in out of certain procts, not the circuit is too complex, that is, functions are too simple and easy to be copied. The reason may be stuck in the proct without the use of a microcontroller or other programmable logic device.
SCM basic component is a central processing unit (CPU in the computing device and controller), read-only memory (usually expressed as a ROM), read-write memory (also known as Random Access Memory MRAM is usually expressed as a RAM) , input / output port (also divided into parallel port and serial port, expressed as I / O port), and so composed. In fact there is also a clock circuit microcontroller, so that ring operation and control of the microcontroller, can rhythmic manner. In addition, there are so-called "break system", the system is a "janitor" role, when the microcontroller control object parameters that need to be intervention to reach a particular state, can after this "janitor" communicated to the CPU, so that CPU priorities of the external events to take appropriate counter-measures.
单片机的简介
可以说，二十世纪跨越了三个“电”的时代，即电气时代、电子时代和现已进入的电脑时代。不过，这种电脑，通常是指个人计算机，简称PC机。它由主机、键盘、显示器等组成。还有一类计算机，大多数人却不怎么熟悉。这种计算机就是把智能赋予各种机械的单片机（亦称微控制器）。顾名思义，这种计算机的最小系统只用了一片集成电路，即可进行简单运算和控制。因为它体积小，通常都藏在被控机械的“肚子”里。它在整个装置中，起着有如人类头脑的作用，它出了毛病，整个装置就瘫痪了。
现在，这种单片机的使用领域已十分广泛，如智能仪表、实时工控、通讯设备、导航系统、家用电器等。各种产品一旦用上了单片机，就能起到使产品升级换代的功效，常在产品名称前冠以形容词——“智能型”，如智能型洗衣机等。现在有些工厂的技术人员或其它业余电子开发者搞出来的某些产品，不是电路太复杂，就是功能太简单且极易被仿制。究其原因，可能就卡在产品未使用单片机或其它可编程逻辑器件上。
单片机的基本组成是由中央处理器（即CPU中的运算器和控制器）、只读存贮器（通常表示为ROM）、读写存贮器（又称随机存贮器通常表示为RAM）、输入/输出口（又分为并行口和串行口，表示为I/O口）等等组成。实际上单片机里面还有一个时钟电路，使单片机在进行运算和控制时，都能有节奏地进行。另外，还有所谓的“中断系统”，这个系统有“传达室”的作用，当单片机控制对象的参数到达某个需要加以干预的状态时，就可经此“传达室”通报给CPU，使CPU根据外部事态的轻重缓急来采取适当的应付措施。

5

⑨ 单片机英文文献及翻译，2200字左右

Single-Chip Microcomputer
有的时候，也可以用SingleChip来代替
下面链接的第六章有讲单片机Single Chip Microcmputer 第148页开始
http://books.google.co.nz/books?id=AUtTx3TgO7IC&pg=PT41&lpg=PT41&dq=what+is+Single+Chip+Microcomputer&source=web&ots=QQqVentmyy&sig=ZPBVtVXwiQakAtCIXJqzRw_BobE&hl=en&sa=X&oi=book_result&resnum=8&ct=result#PPT41,M1

这是一段中汉对照的。
中文:
单片机是把主要计算机功能部件都集成在一块芯片上的微型计算机。它是一种集计数和多中接口于一体的微控制器，被广泛应用在智能产品和工业自动化上，而51单片机是个单片机中最为典型和最有代表性的一种。
本课题选择89S51为核心控制元件，设计了一个日常生活中用到的电子音乐门铃系统。当功能按键按下，音乐响起，发光二极管随着音乐的节拍进行闪烁，LED显示相应的定时器初值。音乐演奏过程中再次按下按键无效，只有当音乐段结束再次按下才有效。如果是电子音乐门铃在响，按下复位按键就终止，显示初始状态。经过实践证明，本系统运行稳定，具有一定的实用价值。
-------------
翻译:
SCM is a major piece of computer components are integrated into the chip micro-computer. It is a multi-interface and counting on the micro-controller integration, and intelligence procts are widely used in instrial automation. and MCS-51 microcontroller is a typical and representative.

The topics chosen for the 89S51 control of the core components used in the design of a daily electronic music doorbell system. When the function button is pressed, the music sounded and the music beats with light emitting diodes for flickered. Initial corresponding LED timer. Musical process again pressed the button ineffective, and only when pressed again before the end of the music effectively. If the doorbell ring for electronic music, press the button on the rection and termination, showed initial state. Practice has proved that the system is stable and has some practical value.

本设计是以凌阳16位单片机为重心，介绍语音控制在机械手中的应用，实现微型舵机的运作，完成所指定的动作。其中通过凌阳16位单片机输出的脉冲信号来准确的控制机械手的摆动角度，机械手的捏拿动作由电磁铁完成，电磁铁的通断由凌阳16位单片机的I/O口控制，硬件和软件都在具体的实验中证明了其可行性
This design is take insults the positive 16 monolithic integrated circuits as a center of gravity, introced the pronunciation control in manipulator's application, the realization miniature servo operation, completes the movement which assigns. Through insults the pulse signal which the positive 16 monolithic integrated circuits outputs to come the accurate control manipulator to swing the angle, the manipulator pinches takes the movement to complete by the electro-magnet, the electro-magnet passes the legal reason for judgment to insult the positive 16 monolithic integrated circuits I/O control, the hardware and the software all have proven its feasibility in the concrete experiment